Optronics Trailer Lights - Clearance Lights - MCL17RB Review Video

We have the Titan version of the coupler you need as Titan Weld-On Coupler part #T1755000 which fits a 3 inch channel and is designed for a 2-5/16 inch hitch ball too.

Dexter does not have an option for an electric lockout on their drum brake actuators, but that doesn't mean you can't add one. It is as simple as adding the Replacement Solenoid Valve for Dexter Brake Actuators #T4748800 to the #T4500600.…

The Dexter #DX27FR would make a good replacement for trailers weighing less than 7500 lbs. The coupler is compatible with a 2 inch trailer ball, so if your trailer meets those criteria, the #DX27FR would be an excellent choice. UFP is now owned by…

We have the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout #DX29FR for disc brakes and the Dexter DX7.5L A-60 Brake Actuator #DX27FR for drum brakes that will be a better option. These will have similar bolt patterns as your Tie Down…

Yes, you can add the #T4748800 to the Dexter DX7.5L A-60 Brake Actuator #DX83FR so you have an electric lockout. This is also compatible with the Dexter Hydraulic Brake Line #T0980100 which is perfect for your folding tongue.

Yes, you can use the inner member from the #DX27FR and the #DX83FR interchangeably. Although they are designed to fit different trailer tongue sizes, they both use the same inner member #DX97FR. You could either purchase the inner member separately…

We have one brake bleeding how-to video that I attached to this page that shows the process is done on surge brake trailers like the Dexter part #DX83FR that you mentioned. We do not have a video for this specific coupler though.

The Dexter DX7.5L A-60 Brake Actuator #DX83FR will replace your current brake actuator on your 2002 Four Winns Horizonte trailer. The Manual Lockout Key #DX94FR is sold separately.

If both of the arms are bent in towards the center then it is possible that the vehicle being towed exceeds the capacity of the tow bar, which is 6,000 pounds, or the inner arms may have not extended all the way causing the vehicle to push forward…

Unfortunately tow bars are only designed to pull forward and will crumple just like yours did if you put any pressure on it going in reverse. The Brightside here is that you may be able to get away with just replacing the arms if they are the only…

Let's hold off on the lobotomy for right now. It sounds like the arms of your Falcon all-terrain #RM-522 are just worn out from dirt and rust and are in need of being replaced. For the driver side you would want part #910021-12 and then for the…

The ring terminal size you need for the posts of the junction box part #3375601101 that you referenced is 3/16 inch like the part #44-5310A which would work great. The terminal matches the correct ring size and also is designed for 10 to 12 gauge…