Malone Roof Rack - Complete Roof Systems - MPG202 Review Video

I took a look at the roof rack requirements for the Roofnest Sparrow and can confirm the Malone AirFlow2 Roof Rack part #MPG216 will work for you based on these requirements so long as your raised side rails allow you to position the crossbars at…

It is possible to shorten the crossbars of the Malone AirFlow 2 part #MPG216 which is 58 inches but an easier option might be to go with the 50 inch version part #MPG215.

The Draw-Tite Max-Frame #75270 for your 2014 Honda Odyssey has a maximum tongue weight of 675 pounds. However, you will be limited by the lowest rated component. So you'll need to check your owner's manual and determine what your…

For your 2018 GMC Terrain with the 1.5L Engine I recommend going with the Draw-Tite Max-Frame Trailer Hitch Receiver #76419. This is a Class III hitch with a 2" receiver with a 4,500 lbs Gross Trailer Weight (GTW) rating and a 675 lb Tongue…

Malone test fit their roof rack part number #MPG202 on your 2013 Lincoln Navigator and found that it fit and worked well.

For your 2017 Ford Expedition EL with factory side rails I recommend the Thule AeroBlade Edge roof rack #TH7502-TH7502. This roof rack attaches to the side rails and has the bars integrated into the feet for a factory appearance. The bars are…

Most likely the answer to your question is yes. The Universal MightyMounts #Y03590 is designed to adapt most Yakima roof carriers to fit nearly all styles of roof rack crossbars. That being said since I do not know which carrier you have I cannot say…

Yes, you will need to add a spacer between the bottom of the airbag bracket and the bottom of your airbag if the distance between the top of your bottom bracket and the bottom of your top bracket is between 6-1/2" to 7-1/2". For this I…

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

Yes, even though the Draw-Tite Max-Frame Trailer Hitch Receiver #76031 only uses 6 bolts as opposed to the 10 bolts for the OEM trailer hitch it has gone through an extensive amount of stress tests to ensure that the 6,000 lb trailer towing rating is…

The Malone Universal Crossbar System #MPG201 is a more economical choice but it still does a good job. The design and quality of Thule's system is why they have such a large difference in price. Whether you go with the Thule Crossroads system…

The experiences we've had with Harbor Freight trailers is that they use standard 5 bolt patterns common on other trailers. The most common being 5 on 4-1/2 inches like what the part #AKIHUB-545-2-1K which fits the common 2,000 lb axle spindle.