Review of Furrion RV Air Distribution Box - FACT11MA-PS Video

Usually when an AC unit is freezing up its because of inadequate airflow. This is usually from a dirty air filter or if too many vents or closed. Another problem can be a clogged up drain line. If the condensation can't drain it can cause an…

Yes, the Furrion manual air distribution box part #FR28PR does come with a controller if that is what you are asking about. It also has controls built into it in case that is what you asked about. It is the same as what you see in the pictures.

Furrion does not offer conversion kits from Carrier brand AC units at this time so you'd need to install the kit part #FR92PR and rewire your setup to this unit.

You can definitely swap up to a higher BTU rating for a more efficient system. You'll just want to first verify what style connector your Dometic rooftop unit has, whether it's a 6-pin or 9-pin connector. You can find the wire harness by…

If you're not wanting a wall thermostat for your Furrion Chill HE system then you'll want the Replacement Air Distribution Box for Furrion Chill HE RV Air Conditioners #FR28PR. This comes with the controls built into the cover.

We have the Furrion air distribution box part #FR28PR that fits the Chill HE AC units and has the diffuser you are wanting for your 13.5k BTU unit.

The Replacement Air Distribution Box w/ LEDs for Furrion Chill RV Air Conditioner #FACT12LA-PS was designed to replace the older style that you sent in a picture of and would work great. It has the LEDs like you are wanting as well.

Yes, the ducts you have now on your RV are the exact same as what the Furrion Chill HE RV AC unit part #FR65PV is designed to fit. This will replace your Carrier system and work really well. We have determined that the Furrion units are really quiet…

The Furrion Chill HE part #FR65PV requires using the thermostat and controls that comes with it. You would not be able to control it with your Carrier setup.

Yes, you can replace just the rooftop unit in order to minimize costs and retain use of your current thermostat. You'll first want to remove the air distribution box cover and look for the controller. There will be a wire harness that hangs down…

You would be doubling the weight capacity of the roof rack components of the setup but most likely you'd be limited by the roof capacity as the HD Rhino Rack roof rack components do have a capacity of 220 lbs. You'd need a set of tracks like…

Those tracks on the Pioneer Platform #RR42115BF will only accept the Channel Hardware #RR73VT. There are no 1/4 turn inserts you will be able to fit inside due to how narrow the channel is.