Review of Exposed Racks Replacement Spacers For Jeep Soft Top Roof Rack - ER65ZR Video

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

Here is the Roadmaster Direct-Connect Base Plate Kit #1444-3 which Roadmaster said to use for your 2017 Jeep Wrangler Unlimited Rubicon. This comes with the arms for a Roadmaster Tow Bar #RM-676. If you are using a Blue Ox Tow Bar #BX4370 you will…

The etrailer tow bar part #e37ZR is manufactured for us by Demco here in the USA.

To add a 7-Way/4-Way combo vehicle connector to your 2017 Jeep JK, I recommend the Universal Installation Kit for Trailer Brake Controller item #ETBC7. The kit includes a pre-wired 7- and 4-way trailer connector that mounts easily at the rear of your…

Hey Gary, the Hopkins tow bar lighting kit part #HM56200 that you referenced carries the stoplight circuit so the brake lights of the Jeep you have it installed in will still function regardless of if you have a braking system pressing the brake…

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

In order to determine the correct trailer wiring harness and brake controller for a 2017 Jeep Wrangler Unlimited you need to know if you have the factory tow package. This should clearly be marked on the window sticker but if you don't have any…

I am happy to help with installation, however there is not a plug-in wiring adapter available for your 2016 Jeep Wrangler Unlimited, so you will need to hardwire the controller to the vehicle. It sounds like you already have the brake controller, so…

For a 2023 Jeep Wrangler 4XE you'll need the following components: Baseplate: Roadmaster Direct-Connect Base Plate Kit #RM-521453-5. These custom-fit baseplates are designed to work with factory bumpers, if you have an aftermarket bumper please…

Your 2017 JK Wrangler won't have the connector at the rear for the #42145 unless it was equipped with the factory tow package. No worries, though. We can make this happen with a minimum of hassle, though it's not quite plug-and-play.…

Looking at the pictures of the Blue Ox base plate kit part #BX1134 installed compared to the bumper pictures you sent in of your 2016 Jeep JK Wrangler Rubicon with the Smittybilt Gen 1 bumper this base plate kit would fit.

Yes, the etrailer SD Non-Binding Tow Bar for Blue Ox Base Plates #e47ZR would have enough adjustability between the 1-1/2" shank rise/drop and the 3" of tilt to meet your 4" difference. I've attached a video below where Dave will…