Custer Agricultural Lights - Driver and Passenger Side - LIW-AGKIT-SG Review Video

There is a difference between a 7-way round and and 7-way rv blade connector. If you take a look at the accompanying photo, which is from our linked article on trailer wiring you can see that the connector on the left has blade-style pins while the…

If you need some additional wire loom to clean up your recent installation of the Roadmaster Battery Charge Line Kit #RM-156-75, I recommend using the Wire Loom #7509-1. This 1/4 inch diameter, split wire loom is sold by the foot so you can order the…

For what you are looking for the most ideal setup will be one that has more sidewall than the 17.5 inch wheel setup you referenced as the more sidewall you have the more the footprint can easily expand when aired down. So going with a 16 inch wheel…

A goose neck hitch ball, or the center of a 5th wheel hitch head for that matter, will be located either right over the rear axle or an inch or so forward of it. You do not want a goose neck hitch ball to be located behind the rear axle since this…

Either way is correct. It depends on if you want to keep the semi-style 7-Way (if you need to tow that type of trailer) or if you will never be towing a semi-trailer. If you need to keep the 7-Way semi active on the truck, then you would need to make…

The wiring for the 7-Pin connector is different than the 7-Way blade connector. You will need an adapter to make the two different styles compatible. You can use the Adapter 7 Way (Blade) to 7 Way (Round Pin), #47595. The blade end plugs into the…