Review of Coghlans Camping Kitchen - Camping Popcorn Maker With Wood Handle - CG73ZR Video

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors…

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

Yes, the Replacement PlusNut Hardware Kit #Y8880039 that you referenced is an optional hardware kit for your Yakima 60" Tracks for Roof Racks #Y01135. This hardware kit is designed for use with sheet metal roof applications.

For your Capri Cowboy truck camper, you can just use any of the Thule Top Tracks for Roof Racks. Thule offers a couple of different lengths depending on the size you need. You'd have to measure the length of your roof and then pick the set of…

The option that will work for your 2017 Cherokee 29TE depends on your axle diameter. For 2-3/8 inch axles, you will want the Dexter Trailer Springs Over-Under Conversion Kit, #K71-384-00. If you have a 3-inch diameter axle, you will want the kit,…

Thank you for the photos! It looks like you have an older Yakima system but we do have the Replacement Yakima Control Tower for Factory-installed Tracks #Y8890027 that will fit. This is sold in a quantity of 1 so be sure to change that to what…

Yes, the Replacement Yakima Control Tower for Factory-installed Tracks #Y8890027 will fit the now-discontinued Landing Pad 12.

The correct landing pad to go with the Tracks part #Y01127 is the Landing Pad 1 part #Y00221. Then for control towers you would need part #Y8890027 for individual towers, and then for 48 inch crossbars part #Y8810021.

You do not need to remove the bed of your truck to install the HappiJac part #LC182906-182971 that you referenced. I found a copy of the install instructions for this part number (see attached pictures) and there's no mention of the bed needing…

Yes, the Curt Trailer Hitch Receiver #C15809 will fit your 2003 Dodge Ram 3500. This receiver is capable of fitting with the factory receiver still installed or no factory receiver present, That is why it looks different from your factory receiver in…