CargoSmart E Track - E-Track Wheel Chocks - 3481731 Review Video

The only retractable straps we carry are ratcheting like the Buyers #3375480011 you found or the Erickson #EM34416. I also was unable to find anyone online making those types of straps.

When you convert the width of your 180mm tire into inches, it's going to be 7.08", and the E-Track Wheel Chock #3481731 is designed to handle a maximum of 7" tires and you're going to be right at the cusp. Since…

I reached out to CargoSmart and found that there is no weight capacity rating for the CargoSmart Motorcycle Wheel Chock for E-Track or X-Track Systems #3481731 since it is only meant to stabilize your motorcycle. The limiting factor would be the…

Normally trailer coupler height is around 17 inches, from the ground to the bottom of the coupler, and most hitch manufacturers design their hitches to work with a ball mount that will end up very close to this measurement. I am including a link to…

The Hollywood Racks #HR200Z-FB Trail Rider's serial number is printed on a silver sticker placed on the horizontal frame portion of the rack, as shown in the provided photo. I've linked you to a product demonstration video featuring the Trail…

E-Track such as the Erickson Horizontal E-Track #E19148 can be used in any way that allows you to mount your pair of motorcycles. As you can see in some of the photos I've added, there is not a set way to add the track. You will need to take…

The X-track fittings of the CargoSmart Motorcycle Wheel Chock #3481731 that you referenced are separated by 12 inches.

In order to make this work I am recommending two sets of ramps, but you will only be using three of the four ramps. The first ramps I recommend are the Race Ramps Trailer Loading Assist Ramps - 5" Lift - 67" Long - Qty 2, part #RR-TR-5.…

You'd have to get somewhat creative to install a motorcycle wheel chock like the part #TWSPWC3BT to a mesh floor trailer. Ideally I'd recommend you mount the chock to a piece of plywood and then mount the wood to the mesh floor or remove it…

Installing the E-Track system to your enclosed trailers upright frame is a good idea for the strongest mounting location and cutting the plywood out to fit around the E-Track would not be an issue that I can see as long as the plywood sides have…

The E-Track part #E19148 that you referenced is not specifically designed for a recess mount although if you wanted to come up with a way to do that you certainly could. A manufacturer was here recently and they had recessed mounted E-rack in their…

For getting your trike up onto a trailer, using the #288-07452-2 along with the #288-07452 ramps as you've proposed would be the best bet, and would be what I'd recommend. The combined capacity of the ramps would handle the weight of your…