Distance Between Mounts of CargoSmart Motorcycle Wheel Chock # 3481731

Question

Question:

Before mounting my X track. I need the center to center measurements of this bracket. That way I can get my two rails close enough to use the motorcycle chock

asked by: Brady O

0

Expert Reply:

The X-track fittings of the CargoSmart Motorcycle Wheel Chock # 3481731 that you referenced are separated by 12 inches.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The only retractable straps we carry are ratcheting like the Buyers #3375480011 you found or the Erickson #EM34416. I also was unable to find anyone online making those types of straps.

view full answer...

Answer 2

With an Enclosed Trailer Ramp Spring #ERS120D81 when the door is lowered it will pull the cables which will turn the pulleys and put tension on the springs. The cables could not be detached with the ramp door lowered because the springs would…

view full answer...

Answer 3

This question is refined by several decisions. What will you use for tie down points on the Corvette? What will you use for tie down points on the trailer? How easy do you want it to be. Finally, what looks good. If you are OK with climbing under…

view full answer...

Answer 4

We have seen people mount storage boxes on either side of the nose of a V-nose trailer like what you see in the picture I attached. The part #DZ91717P would work well if you have room for it like that. The dimensions of the box are 36"…

view full answer...

Answer 5

The best hitch with a 2" receiver for your 2023 Kia Sportage is going to be the etrailer Hitch item #e38KR. This hitch is custom fit and bolts directly to your Kia with included hardware. This is a class III hitch, with a 2"…

view full answer...

Answer 6

E-Track such as the Erickson Horizontal E-Track #E19148 can be used in any way that allows you to mount your pair of motorcycles. As you can see in some of the photos I've added, there is not a set way to add the track. You will need to…

view full answer...

Answer 7

CargoSmart Motorcycle Wheel Chock #3481731 will accept tires up to 7-inches wide but if you refer to the linked photo you'll see that the chock's wheel hoop has a slight taper. 1-inch from the hoop's apex the inside width is…

view full answer...

Answer 8

I reached out to CargoSmart and found that there is no weight capacity rating for the CargoSmart Motorcycle Wheel Chock for E-Track or X-Track Systems #3481731 since it is only meant to stabilize your motorcycle. The limiting factor would be the…

view full answer...

Answer 9

In this situation, most folks either replace the safety chains, using a hook that will fit. Another option would be to use a quick link, like #C82932. Attach the quick link to the safety chain hole in the hitch, then attach the safety chain hook to…

view full answer...

Answer 10

The Dexter Axle Torflex axles are basically broken up into the following categories: #9 - 1,000 - 2,200 lb #10 - 2,300 - 4,000 lb #11 - 4,100 - 6,000 lb #12 - 5,500 - 7,200 lb Based off of your 2004 R-Vision Trail-Lite Model 8306S being a tandem…

view full answer...

Answer 11

To identify the type of Dexter Torflex axle you have on your trailer, there should be a tag or plate located somewhere on the axle itself that lists the part number and weight capacity. The weight capacity should be a good indication of what type…

view full answer...

Answer 12

When you convert the width of your 180mm tire into inches, it's going to be 7.08", and the E-Track Wheel Chock #3481731 is designed to handle a maximum of 7" tires and you're going to be right at the cusp. Since…

view full answer...

Distance Between Mounts of CargoSmart Motorcycle Wheel Chock # 3481731

Product Page this Question was Asked From

Continue Researching