Expert Review Video:
Spare Tire Bike Racks Specs:
Features:
Pair your door-mounted spare tire with the SR1 to transport 1 or 2 bikes. Sturdy rack adjusts to center bikes on vehicles with offset spares. The mounting brace clamps around tires up to 15" wide, and 3 straps secure rack to tire.
More Information >Spare Tire Bike Racks Specs:
Features:
This spare-tire-mounted rack lets you carry 2 bikes on folding dual arms. SuperCush anti-sway cradles with ratcheting ZipStrip straps offer safe bike transport. Tool-free installation with universal mounting plate. Includes locks for bikes and rack.
More Information >Spare Tire Bike Racks Specs:
Features:
This rack lets you carry 2 bikes of different sizes and styles on your spare tire. It has dual arms with anti-sway cradles, and it adjusts for various tire sizes and for offset spares. Locks secure your bikes to the rack and the rack to your vehicle.
More Information >Spare Tire Bike Racks Specs:
Features:
Lightweight rack lets you carry 3 bikes on your vehicle's spare tire. Arms are offset to fit either the right or left side of your vehicle and the rear bar adjusts to fit over wider spare tires. Attaches with 2 cam-buckle straps.
More Information >Videos
for Spare Tire Bike Racks
Help Articles
for Spare Tire Bike Racks
Expert Answers
for Spare Tire Bike Racks
You should not need an extension for the Hollywood Racks Destination E Bike Rack #HLY66ZR to fit on your 2021 Jeep Wrangler Unlimited Sport. We installed this on a 2021 2-door Wrangler which I have included the install video linked near the bottom…
view full answer...The Thule Spare Me Bike rack part #TH963PRO and the Yakima Spare Tire part #Y02599 both do come with locks to secure the rack to your spare tire and cable locks to secure the bikes to the carrier. The biggest difference between the two and is only…
view full answer...Thanks for reaching out, Roy! The term "best" can be a little subjective since everyone has their own experiences and needs/wants, but in regards to which bike rack has the best features it is the…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...You can install a Yakima SpareRide 2 Bike Rack - Spare Tire Mount - Folding Arms #Y02599 on a 2020 Jeep Wrangler JLU, but it's likely going to interfere with the backup camera. There are relocation kits available for this…
view full answer...Yes, the Hollywood Racks SR1 2-Bike Carrier part #HRSR1 will fit the 285/70-17 spare tire on your 2018 Jeep JL Wrangler as it works with tires up to 15" wide and the 285/70-17 spare tire you have is only…
view full answer...For a cargo carrier holding a generator at the back of a travel trailer I definitely recommend installing a frame mounted trailer hitch. It is unlikely that a bumper will be rated high enough to carry the generator and carrier and be able to…
view full answer...According to Yakima, the SpareTime Bike Carrier should NOT be used on towed trailers or campers. The combined weight of the bikes and the rack is not really the issue, rather the fact that the rack will be subject to the additional jarring and…
view full answer...For your 2018 Jeep JL Wrangler, I recommend using a weight distribution system, the Husky Center Line Weight Distribution part #HT32215 for 2" hitch ball or part #HT32216 for 2-5/16" hitch ball. The…
view full answer...That is correct. If your 2021 Wrangler Unlimited has the connector located under the dash to the left of the steering column near the top of the e-brake pedal as shown in the provided photo, you'd use the #3073-P harness to…
view full answer...The backing plate of the Surco Bike Rack part #BT300 that you referenced attaches to the rim by it sliding over the mounting plate for the wheel and then using the lug nuts that attach the wheel to the vehicle as a way to secure the wheel and the…
view full answer...The etrailer Invisible Base Plate Kit part #e98946 which is a fit for a 2005 Jeep Wrangler is designed for models with the factory front bumper. It actually attaches to the bottom of the bumper beam which you can see in the attached installation…
view full answer...Filter Products (8)