2004 Ford Explorer Salt Spreader

What you need for your Isuzu NPR truck is a powered converter #C59236. It is compatible with incandescent and LED trailer lights. I have included a link to the installation instructions for you. This harness does require a direct connection to the…

Assuming your Sprinter has the factory tow package with the 7-way at the rear bumper, in addition to the #RED24FR Redarc Tow-Pro Liberty Brake Controller,…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Your 2008 Chevy HHR should have a set of rails on the roof that run from front to back. Which means we have the Rhino Rack part numbers #RRVA106B-2 and #RRSX100 as a confirmed fit, but the kit you mentioned is not a fit.

Slipper Springs like #e33SR do not use a bolt and bushing for the open eye end of the spring. It connects directly to the hanger using a slipper spring hanger kit.

Blue Ox has base plate kits that fit your 2023 GMC Yukon XL with the part #BLU54VR which fits the AT4 models with 4L and the part #BLU58FR which fits the non-AT4 models. While we…

Yes we have a 14 inch version of the Aluminum Viking Series Valhalla trailer wheel with the part #AX02455545BMFL. This is 5-1/2 inches wide and has the standard 5 on 4-1/2 inch bolt pattern that 14 inch trailer wheels have. I attached a picture of…

We can get you a replacement for your TDE LP75 disc brake actuator;…

The Stealth hitch part #SH27FRT that fits your 2017 Volvo XC90 is the most hidden option we have and also has the towing capacity you need. We also have the Hidden Hitch part #DT82GR that is also totally hidden but it has a 3,500 lb capacity. We…

Yes, you can weld on the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout - Bolt On - Disc -…

Yes, the Dexter Axle Brake Actuator Coupler part #DX56FR is good for towing a trailer up to 7,500 lbs so it would easily work on yours rated for up to 3,520 lbs. This will fit on a straight tongue that is measures 3 inches wide by 5 inches tall.…

Hey John, yes the Tekonsha brake controller install harness part #3050-P is correct for your 2023 Nissan Frontier and would be what you would need to install the Prodigy P2 part #90885. This harness has one end that was designed to fit your truck…