2014 Itasca Spirit Motorhome RV Antenna and Radio

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

Hey Steve, a hitch from a 2019 Kia Sportage like the etrailer #e72TR would also fit a 2021 model so what you have would also fit your new vehicle.

Hey Sam, what replacement parts are you looking for exactly? We should have a lot of parts for your trailer like tires, lights, wiring components, jacks, actuators or brake parts. Feel free to send me more info and I am happy to see what we can…

Thanks for reaching out, Michael! The Dexter Electric Trailer Brakes #K23-086-087-00 are compatible with 3,500 lb axles and have the standard 4-bolt pattern so if that matches the specs of your axle then this will definitely work for your…

Hey Barbara, yes the Yakima OnRamp #Y88DJ can be used on both your camper and Highlander. It's a really great e-bike rack that is RV rated and if you wanted to add the swing away adapter you can too with the part #Y02483. It's not…

Hello Don. Our best option for a super heavy duty bike rack is the Yakima OnRamp LX #Y88DJ. This has an 80 lb per bike rating which give you plenty of cushion. 80 lbs per bike is the max rating for any hitch mounted bike rack we offer, so this truly…

Hey Connie, For your two Trek Verve+ 3 e-bikes I recommend the Yakima OnRamp LX Bike Rack for 2 Electric Bikes #Y88DJ. It has a per bike capacity of 80lbs to accommodate your 54lb e-bikes. The rack does weigh a bit more at 70lbs but it's the best…

Hi Paul, The original Yakima OnRamp has been discontinued, and there are a number of different upgrades that come with the Yakima OnRamp LX Bike Rack for 2 Electric Bikes #Y88DJ. The most important for most people is probably the capacity; while the…

You are correct that the AM/FM signal input is at the rear of the Drive RV Stereo DVD1000. To gain access to the rear on your stereo that's already mounted you will need to first remove the bottom panel from the front face. I have highlighted…

Hey Patti, yes the Yakima OnRamp Bike Rack part #Y88DJ is compatible with vehicles that are being flat towed so it would work well for you. The ramp built into this will make loading the bikes quite a bit easier as well.

Hello Jason. Unfortunately we do not offer a repair kit specifically for the Fulton 5,000 lb 2" A-frame couplers. It is possible that the #CA-5100-RK repair kit would work, since the Ram models are quite similar to the Fulton. We have never…

Hey Robert, thanks for reaching out! You are correct that you'll want to install the rear Hellwig Anti-Sway Bar #HE78RR first on your '22 Entegra Odyssey 26D, and then if you still need more help you can install the front Hellwig Anti-Sway…