Which Converter Module is Recommended When Adding a 3rd Brake Light to the Rear of the Trailer
Question:
I have a typical 12v trailer wiring system running lights, left stop and turn, right stop and turn I want to add a third brake light to the rear of the trailer, so I need a module that will send 12V to the third brake light only when both stop/turn signals are active the brakes are on. Currently I can have the third brake light attached to one of the tail lights so that it flashes with one of the turn signals as well as coming on with the brakes. I tried a Pacer Performance 20-702 module made for this purpose, and strange things happened, the third brake light came on with either turn signal and it made the tail light that was supposed to be inactive flash as well. All the lights are LEDs
asked by: Scott F
Expert Reply:
What you actually need is the Tow-Ready vehicle to vehicle taillight converter # 118158. It will convert your two wire system on your towing vehicle up to a three wire system to your towed vehicle.
On the input side of the converter # 118158 going to your RV you will match each function to the appropriate function of your trailer. To make sure you have found the correct wires for each function, use a circuit tester like # PTW2993 to test the wires. The output side gets connected to the wiring harness on your towed vehicle. You can mount the converter # 118158 at the rear of the towed vehicle.
I have included a video review for you too.
Products Referenced in This Question
Product Page this Question was Asked From
Vehicle to Vehicle Tail Light Converter
- Accessories and Parts
- Trailer Wiring
- Mounting Hardware
- Brackets
- 7 Round
- 7 Round
- Tow Ready
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: 3rd Brake Light Logic Module
- Shop: Trailer Wiring
- Shop: Vehicle to Vehicle Tail Light Converter
- Shop: Hopkins Tail Light Converter - LED Compatible
- Search Results: hm48847
- Search Results: 3 to 2 wire converter
- Search Results: 118158
- Shop: Vehicle Tow Bar Wiring
- Video: Review of Hopkins Wiring - Trailer Connectors - HM48847
- Q&A: How to Install 3-Wire LED Type Light to 4-Pole Wiring
- Q&A: How to Wire a Third Brake Light on Trailer
- Search Results: 44649
- Article: Trailer Wiring Diagrams
- Video: Choosing the Right Trailer Wiring
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Hitch
- Video: Tow Ready 4-Pole Mounting Bracket Installation
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Search Results: 68149
- Shop: Brake Controller
- Search Results: dust cap
- Shop: Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Replacement Clearance Lights Needed for GLO-BRITE 122R and 122Y Lights
- Video: Choosing the Right Brake Controller
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: 2022 Toyota Highlander Wiring for a 7-Way Blade Connector