Inner Depth of the Chrome Trailer Wheel Center Cap # 425EZ

Question

Question:

....how deep is this product? Thanks! P.S. ? Im waiting on a part for my trailer that should be here tomorrow so I can take a measurement then I can place my order with you. thanks!

asked by: Brian

0

Expert Reply:

The inside height or depth of the Chrome Trailer Wheel Center Cap, item # 425EZ, is 4-1/4 inches.

The overall height of the Chrome Trailer Wheel Center Cap, item # 425EZ, is 4-3/8 inches.

I attached a review video for more info for you to check out as well.

expert reply by: Jameson C

0

Answer 1

The Excalibur ST-104EZSS-60C is stainless steel and the Trailer Wheel Center Cap part #425EZ is chrome.

view full answer...

Answer 2

While we don't have that exact part number we do have the similar Wheel Center Cap part #425EZ which fits the pilot hole of a wheel that measures 4.25 inches in diameter and has a removable center section like the part number you mentioned.

view full answer...

Answer 3

The Lionshead Trailer Wheel Center Cap #LHCS108-SI60C referenced in your question should fit over your Bearing Buddy without issue, but I do recommend taking a quick measurement just to be sure. The inside length of this center cap is just under…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 7

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Answer 8

The torque for the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles - 12" - 5 Spoke Utility #8-174-5UC3 is not specified by the manufacturer. For 9/16 inch studs, the typical lug nut torque will be 120-140 ft lbs based on most…

view full answer...

Answer 9

Good morning, Cliff. As of today (3/27/24) we are expecting the #KE33JR tire/wheel combo to be in stock in about 2 weeks. Hopefully this means we can take our own pictures and put them on the site within maybe about 3-4 weeks from now. What I can…

view full answer...