Capacity of Hitch 75101 Using Weight Distribution to Tow an RV with a 2000 Dodge Ram
Question:
Is this hitch suitable for towing a 5k pound rv with sway bars and weight dist bars? Fully loaded, the rv may weigh 5600 lbs. THanks
asked by: Bobby V
Expert Reply:
The Draw-Tite Trailer Hitch, # 75101, is rated high enough (8,000 pounds GTW with WD). The limiting factor is how much your vehicle can tow. Check your owners manual to see what the towing capacity of your vehicle is and do not exceed it. I have included a link to the instructions for this hitch below.
When towing that much weight, I recommend using a brake controller if you do not already have one. One of our most popular models is the Tekonsha Prodigy P2 Brake Controller # 90885-3020-P. If you have a factory installed tow package, you would just need to plug in and mount the brake controller.
If you have factory 4-Way, you will need to add Adapter 4 Pole to 7 Pole and 4 Pole, # 37185. If you have no trailer connector, you will need Brake Controller 7 and 4 Way Installation Kit, # ETBC7, and Tow Ready Custom Fit Vehicle Wiring, # 118329. I have included FAQs on brake controller wiring below.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Dodge
- Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Vehicle Specific
- Tekonsha
more information >
Adapter 4-Pole to 7-Pole and 4-Pole
- Trailer Wiring
- Wiring Adapters
- Multi-Function Adapter
- 4 Flat
- Plug and Lead
- 4 Flat
- 7 Round - Blade
- Hopkins
more information >
Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LED Display
- Up to 360 Degrees
- Tekonsha
more information >
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 500 lbs TW
- 5000 lbs GTW
- 8000 lbs WD GTW
- 2 Inch Hitch
- 800 lbs WD TW
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Recommended Trailer Hitch For 2000 Spartan Newmar
- Q&A: How to Identify What Bumper Type My 2001 Dodge Ram 3500 DRW Has to Correctly Select a Trailer Hitch
- Q&A: Ramp Compatibility for Kubota L2501 with Rear Attachments
- Article: Trailer Hitch Receiver Sizes
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Does Curt Hitch # C31017 Require Moving License Plate Bracket of 2008 Ram 2500 4x4
- Q&A: Will a Resonator Exhaust Tip Make My Car Sound Louder
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Article: Types of Bumpers
- Q&A: What do Trailer Acronyms GTW and TW Mean
- Q&A: Measurements On Draw-Tite Trailer Hitch # 41952