bing tracking image
Q & A Icon

Can the Integrated Brake Controller of a 2011 Dodge Ram 3500 Activate a Carlisle EOH Brake Actuator  

Question:

on the 2011 dodge,would i still need the HBA-CAM if i replaced the factory brake controller with aftermarket controller? this would be with the HBA 10 actuator with serial no. 305300 electric over hyd. with drum brakes.

1

Helpful Expert Reply:

The factory brake controller in your 2011 Dodge Ram 3500 is not compatible with the HydraStar Electric-Hydraulic Actuator for Disc Brakes # HBA16 that you referenced. There is no adapter available that would make it work either.

Your only option would be to replace your factory controller with an aftermarket one that is confirmed to work with electric over hydraulic brakes. The one we recommend the most is the Prodigy P2 Brake Controller part # 90885. I attached a link to an FAQ article that talks more about this for you to check out.

The correct harness you would need to install the P2 would be the part # 3021-P.

expert reply by:
1
Jameson C

Les

10/9/2014

on the 2011 dodge,would i still need the HBA-CAM if i replaced the factory brake controller with aftermarket controller? this would be with the HBA 10 actuator with serial no. 305300 electric over hyd. with drum brakes.

Jameson C.

10/9/2014

No, if you went with the # 90885 you would not need to use the # HBA-CAM. You would just need to put the controller in electric over hydraulic mode and the controller would work as-is with the # HBA16.

Products Referenced in This Question




Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>