Mounting Hardware Recommendation for the Surco 5.0 Roof Basket part # SPS4560-Y400

Question

Question:

I have a Surco Safari roof rack and Ive had a crossbar bracket break. I can send a photo. Do you sell bracket replacement kits?

asked by: Tom M

1

Helpful Expert Reply:

Since the Surco Roof Basket part # SPS4560-Y400 you have is the one designed to fit Yakima crossbars you would want the part # SPY400 as replacement mounting hardware.

expert reply by: Jameson C

1

Answer 1

The U-bolts of the Mounting Adapters for Surco Safari Rack 5.0 Rooftop Cargo Basket #SPY400 have a 1/4"-20 thread size. From center to center of the mounting bracket holes/ends of the U-bolts is 1-1/4". The U-bolts can accept a…

view full answer...

Answer 2

I checked with Malone and they don't offer a maximum and minimum side rail size for the Malone SteelTop Roof Rack part #MPG202. That said, they do come with a shim (see photo below) that is to be used on smaller sized side rails so you should…

view full answer...

Answer 3

Malone is a great economical choice for your light use on your 2022 Chevy Equinox with raised rails. As far as the Malone AirFlow 2 aero bars and the Malone SteelTop #MPG202, I recommend going with the AirFlow 2 - 58" #MPG216 for a couple…

view full answer...

Answer 4

Yes, the Malone SeaWing Kayak Carrier with Tie-Downs #MPG107MD will work just fine with your square Malone SteelTop Roof Rack #MPG202 that are 1-1/4" wide and 7/8" tall. This kayak carrier will also work with round, aero, elliptical, and…

view full answer...

Answer 5

The square part of the Mounting Adapters for Surco Safari Rack 5.0 Rooftop Cargo Basket #SPY400 is for a 3/4" square bar so if that's what your crossbars measure then the square part will fit the crossbars as it sounds like you're…

view full answer...

Answer 6

The black square portion of the Mounting Adapters for Surco Safari Rack 5.0 Rooftop Cargo Basket #SPY400 is metal. If it was plastic it wouldn't really be strong enough to do it's job very well.

view full answer...

Answer 7

It sounds like the Replacement Round Bar Adapter #Y96KR in your Yakima JayLow Kayak Carrier #Y04073 is either missing or damaged. These adapters are specifically designed to hold the JayLow carrier firmly on round crossbars like you have on your…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 12

To add a hitch to your 2024 Jeep Grand Cherokee L, I recommend the Draw-Tite item #DT42GR. This hitch is custom fit and bolts to your Jeep with included hardware. This is a class III hitch with a 2" receiver. It has a 7,500 lbs towing capacity…

view full answer...

Mounting Hardware Recommendation for the Surco 5.0 Roof Basket part # SPS4560-Y400

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching