Center To Center Dimensions Of The Mounting Adapters for Surco Safari Rack 5.0 Rooftop Cargo Basket

Question

Question:

I want to use these u bolts to mount something else to Yakima round bars. Do you know the thread and center to center specs? Thanks.

asked by: Vin

0

Expert Reply:

The U-bolts of the Mounting Adapters for Surco Safari Rack 5.0 Rooftop Cargo Basket # SPY400 have a 1/4"-20 thread size. From center to center of the mounting bracket holes/ends of the U-bolts is 1-1/4". The U-bolts can accept a 1-1/8" diameter round bar.

expert reply by: Kevin C

0

SPY400
(click to enlarge)

Answer 1

Since the Surco Roof Basket part #SPS4560-Y400 you have is the one designed to fit Yakima crossbars you would want the part #SPY400 as replacement mounting hardware.

view full answer...

Answer 2

I went out to the warehouse and pulled the Mounting Adapters for Surco Safari Rack, #SPT400. The u-bolts measure 1-7/16 inches from inner edge to inner edge. You could potentially flex the u-bolts to accommodate a 1-1/2 inch diameter bar but the…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 7

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 8

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 9

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Answer 10

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

The Hydraulic Line Kit #9579-01 comes with two 18" flex hoses and two 51" steel lines.

view full answer...

Center To Center Dimensions Of The Mounting Adapters for Surco Safari Rack 5.0 Rooftop Cargo Basket

Product Page this Question was Asked From

Continue Researching