Are Replacement Washers Available for Thule Fit Kit 3101

Question

Question:

I cant seem to find the gold/brass washers I beLieve go with this hardware kit? Could you help me, please

asked by: Brent G

0

Expert Reply:

Actually I spoke with my contact at Thule and she informed me that they do not carry replacement parts for their fit kits. I wish I had something better I could offer you, but your only option would be to replace the entire fit kit with a new part # THKIT3101.

expert reply by: Jameson C

0

Answer 1

To construct a roof rack compatible with the Thule Track system on your camper shell, you'd need the following parts: Thule Rapid Podium Foot Pack, part #TH460R Thule Fit Kit for roof rails, part #THKIT3101 Then you need to choose the length…

view full answer...

Answer 2

It sounds like you may be looking for the Thule Fit kit for Podium Feet in channels part #THKIT3101. The fit kit includes pads, bolts, plates and channel nuts for adapting the Podium legs for use with tracks.

view full answer...

Answer 3

Yes, the Rapid Podium Feet for Thule Crossbars - Fixed Point - Qty 4 #TH460R will allow you to attach aero-style Thule crossbars on top of your Leer topper with Thule tracks. The Rapid Podium Feet will fit right into the tracks. If you need a…

view full answer...

Answer 4

The dimensions of the track nut in the Fit Kit for Thule Podium-Style Roof Rack Feet part #THKIT3101 is as follows: Thickness - .16 inches Long Sides - .993 inches Short Sides - .447 inches Width - .47 inches Long Point to Long Point - 1.32 inches…

view full answer...

Answer 5

The dimensions of the Wingbar Thule crossbars like part #TH711420 are 3-1/8" wide x 1" tall.

view full answer...

Answer 6

The Thule Top Track Roof Mount System #THTP42 referenced in your question is designed to permanently mount to the roof of your camper and is compatible with the Podium #TH460R Feet. If this is what you currently have, then you will be able to use the…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 9

Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…

view full answer...

Answer 10

The Thule square bar roof racks have changed slightly from what you have now so what you'd need is the fit kit part #THKIT3101, the feet #TH460R, and then the crossbars #TH713700 which is a 79 inch long ProBar Evo. This is only style of bar…

view full answer...

Answer 11

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Are Replacement Washers Available for Thule Fit Kit 3101

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching