79 inch Long Thule Roof Rack that Fits Camper Shell Roof Tracks

Question

Question:

My camper shell came with tracks and mountain feet 853-5112 but no bars. I want to put 78-in bars on top of my pickup shell but I dont know what hardware is compatible with these mounting feet. While I am at it I will happily replace the existing mounting feet with new aftermarket hardware if each trailer can help me identify the parts I need to complete my camper roof rack.

asked by: Eric

0

Expert Reply:

The Thule square bar roof racks have changed slightly from what you have now so what you'd need is the fit kit part # THKIT3101, the feet # TH460R, and then the crossbars # TH713700 which is a 79 inch long ProBar Evo. This is only style of bar that's close to the dimension you are wanting.

expert reply by: Jameson C

0

Eric

3/17/2024

I am in need of one additional TH713700 (79" ProBar Evo), a pair of 3101 feet (I don't need all 4, just 2), and two 460R feet. Is this a custom order etrailer.com could help me with? Thanks

Reply

Jameson C.

3/18/2024

@Eric The fitkit 3101 is only sold as a set of 4 and there isn't a way to get just two. The 460R is no longer available so we can't help with that either. Only thing we offer is the crossbar # TH713700.

Reply

Answer 1

Yes, the Thule Hullavator Pro Kayak Carrier part #TH898 will work with the Thule WingBar Evo Crossbars. These are just an updated version of the Thule AeroBlade Crossbars. The Hullavator can be attached to the WingBar in one of two ways, with…

view full answer...

Answer 2

To pick out a fairing you need to measure the distance between the feet of the roof rack and go with one that fits the best between them. Below are the available sizes we offer that are for Thule bars and can fit other crossbars: #TH62WV for a 32…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 5

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Thanks for reaching out to verify, Frank! Yes, those parts (listed below) will fit great together and on your 2010 Honda Accord Crosstour with the naked roof. Inno Roof Rack - Aero Crossbars #INXB130-138 - Through Feet #INXS250 - Fit Kit #INK587 The…

view full answer...

Answer 8

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

view full answer...

Answer 9

The Malone Universal Crossbar System #MPG201 is a more economical choice but it still does a good job. The design and quality of Thule's system is why they have such a large difference in price. Whether you go with the Thule Crossroads system…

view full answer...

Answer 10

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Answer 11

The Rhino-Rack Roof Rack for Factory Tracks #Y02-490B-NT is going to be your best bet for the tracks on the ARE topper for your 2012 Toyota Tacoma. The weight capacity is 220 lbs like you mentioned, but that's going to be the highest you'll…

view full answer...

Answer 12

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

79 inch Long Thule Roof Rack that Fits Camper Shell Roof Tracks

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching