SportRack Hitch Bolt Dimensions

Question

Question:

Im looking for a sport rack bike rack hitch pin that is 1/2 in around and 5 inches long. Do you carry this? Most of your products dont have dimentions,listed.

asked by: Deanne U

0

Expert Reply:

I spoke with my contact at Sportrack who informed me that their hitch bolt part # 05002400000 is 3-1/4 inches in length with a hex head size of 1/2 inch by 13 mm. The diameter is 1/2 inch.

The closest hitch bolt we have to what you are looking for would be the # 853-5917 which is 1/2 inch in diameter an 4-1/2 inches in length.

expert reply by: Jameson C

0

Answer 1

The dimensions on the Replacement Threaded Hitch Bolt for SportRack Bike Racks and Cargo Carriers Item #05002400000 is 1/2 inch at a -13 course count.

view full answer...

Answer 2

Since we don't carry Allen bike racks, we don't offer a brand-specific lock that would work. Typically, the bike rack manufacturers use threaded hitch pins that have a proprietary thread pitch, so you're forced to purchase their hitch…

view full answer...

Answer 3

Since the Thule Rak N Lok has been out of production for quite a few years, Thule does not have any specs or information regarding replacement parts. That said, I will do my best to provide some helpful information or parts that may work. Erailer…

view full answer...

Answer 4

The Replacement Threaded Hitch Bolt #05002400000 you were looking at is 3-5/16" long and is 1/2" x 13 course thread. This bolt is designed for SportRack bike racks and cargo carriers, and is not a confirmed fit for your Swiss Cargo Bike…

view full answer...

Answer 5

The answer is actually all of the above - the Swagman Trailhead 4-Bike Rack #S63380 does not come with any locks, either to lock it into the hitch or the cable lock for the bikes. You can add both, however, with the Anti-Rattle Hitch Lock and Cable…

view full answer...

Answer 6

I do have an alternative for you since the u-bolts included with the CE Smith Post-Style Guide-Ons #CE27637 will only fit up to a 5-1/4" tall frame. Instead we have the Ark Ezi-Guides Self-Aligning Boat Trailer Loading System. This is superior…

view full answer...

Answer 7

From what I could find out about your current circuit board, the Atwood Replacement Control Panel #AT91367 will be a direct replacement.

view full answer...

Answer 8

The Yakima Replacement Hitch Bolt and Clip for Yakima HoldUp Hitch Mounted Bike Carrier, part #Y8890200, is a 5/8 inch bolt. The size wrench you would use to install or remove this bolt is 15/16 inch.

view full answer...

Answer 9

We do offer the Replacement Hardware Kit #CE11452-A and Replacement Upright #CE27605PG for the CE Smith Post-Style Guide-Ons #CE27637.

view full answer...

Answer 10

I definitely understand how safety chain capacities and determining exactly what chain rating you need for your trailer can be a bit confusing. To keep it as simple as possible, safety chain requirements state that the breaking strength of EACH…

view full answer...

Answer 11

We don't carry BV products, so I couldn't say if any of the bike rack threaded hitch pins we offer would be a compatible replacement. If your rack has a 2 inch hollow shank and doesn't use an adapter, a universal option like #SHP2061…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

SportRack Hitch Bolt Dimensions

Product Page this Question was Asked From

Continue Researching