Will the Camco RV Olympian 6500 Grill # CAM57245 work with 16 psi Regulator

Question

Question:

I currently have a 16 psi regulator on my Coleman trailor is that to large for the 6500 grill? And if what size regulator show be used for the 6500 grill?

asked by: Charlie F

0

Expert Reply:

I spoke with my contact at Camco and he said that your 16 psi regulator should work just fine with the Camco RV Olympian 6500 Stainless Steel Grill w/ Quick Connect Hose # CAM57245. He said this grill is designed to work on low pressure propane and should work well for you.

expert reply by: Jameson C

0

Answer 1

Welcome back! Yes, you will want to lubricate the Tab Assemblies item #BLU57XR. Make sure you're using a silicone based lubricant like the Roadmaster LubeMaster Dry Silicone Spray item #RM-747 and not a petroleum based one like WD40.

view full answer...

Answer 2

No you can not use the long ends to mount the platform. The platform #RR82TB can only be mounted to the legs using the underside crossbars. There is no other spot on the platform that can accept legs.

view full answer...

Answer 3

The 15,000 Btu Furrion air conditioner is what I would recommend and what I have on my trailer. Since it is an enclosed trailer I'm guessing you want the manual distribution box. You can choose from the following based on color: -Furrion Chill HE…

view full answer...

Answer 4

Yes, we do. To carry the Thule Hullavator item #TH898 on your 2021 Jeep Gladiator Sport, I recommend the roof rack by Rhino Rack and it includes the following parts: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 71" Long - Qty 2 item…

view full answer...

Answer 5

There are several different ways to install a Rhino-Rack Pioneer Platform Rack on the roof of your truck bed topper. I recommend using the track system as this will work the best for your application. In order to install the Rhino-Rack Pioneer…

view full answer...

Answer 6

The weight capacity of the Rhino-Rack Vortex Aero Crossbars part #RRVA165B-2 is 165 lbs which is for both bars and the weight must be evenly distributed. If you're looking for more, the Rhino-Rack Heavy-Duty Roof Rack Crossbars part #RB1650B-2…

view full answer...

Answer 7

Your power cord, just like with the Mighty Cord #A10-5025END will wire the black and red wires as your positive, white as your neutral, and green as your ground. The green wire should not be sticking out of the sleeve like you have pictured and the…

view full answer...

Answer 8

Yes, in order to set your trailer up for use with shore power you will first need an AC distribution panel. For this, I recommend a Progressive Dynamics Series AC Distribution Panel. In order to bring power into the panel you will also need a power…

view full answer...

Answer 9

Thanks for providing that information it really makes this simple. To find the right Gen-Y we need to calculate your tongue weight using the formula GVWR x 0.22 = TW. The Z2900 has a GVWR of 14,495 lbs so the TW is 3,189 lbs. Based on this…

view full answer...

Answer 10

Aside from the six 15A or GFCI power receptacles (5 interior and 1 exterior) and the breakers/fuses, we have all the parts you need to complete your project. For the power inlet on the outside of your horse trailer you can use the Epicord 30 Amp…

view full answer...

Answer 11

To replace the motor on the LCI Pump 650057 we have the Replacement Motor #LC167576.

view full answer...

Answer 12

Personally I wouldn't go with Timbren's for your needs. They're essentially rubber bump stops that prevent your suspension from flexing when weights placed on the rear of your Canyon. The major issue with them is comfortability when you…

view full answer...

Will the Camco RV Olympian 6500 Grill # CAM57245 work with 16 psi Regulator

Product Page this Question was Asked From

Continue Researching