Tailgate Lock for a 2014 Chevy Silverado 1500

Question

Question:

tailgate lock for 2014 Silverado 1500?

asked by: Charles K

0

Expert Reply:

The Pop & Lock Custom Tailgate Lock # PAL8140 that you referenced would be the correct tailgate lock for your 2014 Chevy Silverado 1500.

expert reply by: Jameson C

0

Answer 1

I do have one option for you since the Replacement BOLT Lock Cylinder #BL709231 is for the Tailgate Handle with BOLT Lock #BL5922987 and will not replace the factory lock on your 2015 Chevrolet Silverado 1500WT. For that cylinder you will need to…

view full answer...

Answer 2

I checked with Pop & Lock and the correct power tailgate lock for your 2015 Chevy Silverado is #PAL8140. I have included a link to a video review of this lock for you.

view full answer...

Answer 3

We have exactly what you are looking for to add a power lock to the tailgate of your 2019 GMC Sierra 2500, the Pop & Lock Custom Tailgate Lock #PAL8140 which is a great option because it installs easily and includes all the hardware you'll…

view full answer...

Answer 4

The Pop and Lock Tailgate Lock part #PAL8140 that you referenced would work well on your 2015 GMC Sierra 1500 with a non-locking OEM tailgate handle as it has been confirmed to fit all models of your truck.

view full answer...

Answer 5

As long as your key looks like the one pictured the Replacement BOLT Lock Cylinder #BL709231 will fit the tailgate on your 2013 Chevrolet Silverado.

view full answer...

Answer 6

The Pop & Lock Power Lock Conversion Kit for Truck Caps and Hard Tonneau Covers #PAL9772 will work on the A.R.E. MX series truck cap you referenced on your 2017 Ford F-250 Crew Cab Short Bed. This will give you a clean look along with the keyless…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 12

Yes, the Air Lift LoadLifter 5000 Air Helper Springs #AL57341 will fit your 2024 Chevrolet Silverado 2500 double cab with the Duramax diesel engine and factory puck system. We installed the upgraded Springs #AL88341 on a similar 2022 which I have…

view full answer...

Tailgate Lock for a 2014 Chevy Silverado 1500

Product Page this Question was Asked From

Continue Researching