Will Replacement BOLT Lock Cylinder # BL709231 Fit Tailgate on 2013 Chevrolet Silverado

Question

Question:

does this fit on a 2013 Silverado truck tailgate

asked by: David P

0

Expert Reply:

As long as your key looks like the one pictured the Replacement BOLT Lock Cylinder # BL709231 will fit the tailgate on your 2013 Chevrolet Silverado.

expert reply by: Jon G

0

click to enlarge

Answer 1

I do have one option for you since the Replacement BOLT Lock Cylinder #BL709231 is for the Tailgate Handle with BOLT Lock #BL5922987 and will not replace the factory lock on your 2015 Chevrolet Silverado 1500WT. For that cylinder you will need to…

view full answer...

Answer 2

The Pop & Lock Custom Tailgate Lock #PAL8140 that you referenced would be the correct tailgate lock for your 2014 Chevy Silverado 1500.

view full answer...

Answer 3

The Pop and Lock Tailgate Lock part #PAL8140 that you referenced would work well on your 2015 GMC Sierra 1500 with a non-locking OEM tailgate handle as it has been confirmed to fit all models of your truck.

view full answer...

Answer 4

We have exactly what you are looking for to add a power lock to the tailgate of your 2019 GMC Sierra 2500, the Pop & Lock Custom Tailgate Lock #PAL8140 which is a great option because it installs easily and includes all the hardware you'll…

view full answer...

Answer 5

I checked with Pop & Lock and the correct power tailgate lock for your 2015 Chevy Silverado is #PAL8140. I have included a link to a video review of this lock for you.

view full answer...

Answer 6

The Pop & Lock Power Lock Conversion Kit for Truck Caps and Hard Tonneau Covers #PAL9772 will work on the A.R.E. MX series truck cap you referenced on your 2017 Ford F-250 Crew Cab Short Bed. This will give you a clean look along with the keyless…

view full answer...

Answer 7

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 8

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 9

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 10

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 11

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 12

The Titan Hitch Box Extension and Reducer for 2-1/2" Trailer Hitches, #RP45292, is a confirmed fit for your 2012 Chevrolet Silverado 2500 HD short bed with a Lance camper. This extension is specifically designed for your slide-in camper with the…

view full answer...

Will Replacement BOLT Lock Cylinder # BL709231 Fit Tailgate on 2013 Chevrolet Silverado

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching