Cruise Control Stopped Working after Tekonsha P3 Installation
Question:
Hello, I installed the P3 on a 2010 Toyota Sienna. I double and triple checked the wiring and everything is OK. The problem is now the Cruise Control doesnt work. The Cruise Control light stays on steady as it should when I turn it on at the same time the brakes are applied, and will stay on steady as long as the brakes are applied. But as soon as I release the brakes the Cruse Control light blinks and wont work. This is without a trailer connected. Ive tried everything I can think of. Any help would be greatly appreciated. Oh and by the way the trailer brakes seems to be working fine when using the P3 and the P3 doesnt give any errors when pulling the trailer. So Im fairly sure everything is hooked up properly. The only issue is the Cruise Control doesnt work!
asked by: Tim W
Expert Reply:
We have seen this issue before and when cruise control functionality gets affected after a brake controller install the problem is the stoplight switch wire that was used for the installation of the brake controller.
Basically the red wire of the Prodigy P3 Brake Controller # 90195 that you referenced isn't installed on the correct circuit. You want to find the circuit on your brake switch that only sees voltage when the brakes are applied.
I attached an FAQ on brake controller installation from scratch that you may find helpful.
Product Page this Question was Asked From
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LCD Display
- Up to 360 Degrees
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Brake Controller
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Shop: Curt Echo Wireless Brake Controller - 7-Way Plug Mount w/ Bluetooth App - 1 to 2 Axle - Proportional
- Shop: Curt Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In
- Video: Review of Curt Trailer Brake Controller - Proportional Controller - C49UR
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Video: Review of etrailer - Brake Controller - ETBC7
- Video: Tekonsha Prodigy P3 Trailer Brake Controller Installation - 2014 Toyota Sienna
- Q&A: Brake Controller Recommendation for a 2015 Lexus GX 460
- Q&A: Brake Lights on a 2005 Dodge Ram 2500 Stay on with Brake Controller Connected
- Shop: Curt Echo Under-Dash Bluetooth Brake Controller w/ OneControl App - 1 to 4 Axles - Proportional
- Shop: Manual Override Button for Curt Echo Brake Controller
- Q&A: Troubleshooting Curt Echo Brake Controller Not Getting Power/Not Connecting to iPhone
- Q&A: Recommended Trailer Brake Controller for a 2022 Toyota Tundra
- Video: Choosing the Right Brake Controller
- Q&A: Will Curt Echo Brake Controller Work on 2014 Lexus GX 460 with 7-Way
- Q&A: Easiest to Install/Use Brake Controller Recommendation for 2018 Toyota Tundra
- Search Results: c51170
- Search Results: 51515
- Search Results: curt
- Video: Choosing the Right Trailer Wiring
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Search Results: brake controller
- Article: Trailer Wiring Diagrams
- Search Results: trailer brake controller
- Article: How to Choose the Right Trailer Hitch Class
Steve
3/24/2024
The harness purchased for 2008 tundra for P3 worked 2 years until it gradually ruined my cruise. I replaced cruise control but the issues with telonsha persist.