bing tracking image
Q & A Icon

Brake Lights on a 2005 Dodge Ram 2500 Stay on with Brake Controller Connected  

Question:

The brake controller port on a 2005 Dodge Ram 2500 equipped with the appropriate tow package is located under the dash near the emergency brake pedal. Is there a fuse or something because i lost power from the port to my brake controller it just dead! was having the problem of my brake light staying on! unpluged my brake controller than my brake lights would shut off and now pluged brake contoller back in now no power. thanks

0

Expert Reply:

On your 2005 Dodge Ram 2500, the fuses that protect your tow package circuits are located in the fuse box located under the hood. The fuse box should have a legend on the inside of the cover that outlines which fuse protects which circuit.

If your fuses are blown, I would recommend to check all of the wiring and the connections for your brake controller and the 7-Way connector to make sure that none of the wiring is shorting out and causing the fuses to be blown.

I would also recommend to test your brake controller to make sure that the problem is not with the unit itself. If you have the Tekonsha P3 Brake Controller, part # 90195, it has diagnostic options that can be run to determine if there is a problem with the brake controller.

I am including a link to the instructions on the Tekonsha P3 brake controller and a video link of how to test your brake controller.

expert reply by:
0
Mike L

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>