Thule Ascent 1100 Replacement Cradles

Question

Question:

What is the correct replacement cradle for a Thule Ascent 1100? It looks like part number 5740 is being suggested?

asked by: Matt

0

Expert Reply:

Yes, the correct replacement cradle for your Thule Ascent 1100 would be the Replacement Snapfit Cradles part # TH8523387001 that you referenced.

expert reply by: Jameson C

0

Answer 1

The flat side of the Replacement Cradle for Thule AcuTight and Quick Grip Mounting Hardware part #TH8523387001 will go against the bottom of the cargo box which you can see in the attached photo. Therefore, the screw hole will be facing down towards…

view full answer...

Answer 2

The piece you're speaking of is what Thule refers to as an AcuTight cradle. It isn't included with the #TH94JV fast grip clamp, but is available separately as part #TH8523387001. I've linked to product description videos for the…

view full answer...

Answer 3

Since the Replacement AcuTight Mounting Hardware with Screw #TH7521484001 and Replacement Quick Grip Mount Assembly #TH05738 use the same mounting cradle #TH8523387001 you will have no issues using one Quick Grip to replace your damaged AcuTight.

view full answer...

Answer 4

You will need the Replacement AcuTight Mounting Hardware #TH7521484001 for your Thule Sonic 634 as it came with the AcuTight Mounting System. The Replacement Quick Grip Mount Assembly #TH05738 is specific to the Thule Ascent, Atlantis, and Force…

view full answer...

Answer 5

When it comes to attaching your Thule Ascent 1100 To the Thule Aero Blade Crossbars you will need. The Replacement Quick Grip Mount Assembly - Thule Ascent, Atlantis, and Force Cargo Box - Qty 1 #TH05738 which will replace a damaged quick mount…

view full answer...

Answer 6

Thank you for the pictures you submitted. Based on them I was I was able to determine that your box uses the Quick Grip Mount Assembly #TH05738 and the #TH8523387001 for cradles.

view full answer...

Answer 7

Thank you for the picture! So right off I can say that you will need to get more than 1 of the Replacement Cradle #TH8523387001. Since it's a different design than the other 3 I recommend picking up 2 of these and using them for the Quick Grip…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

There are some subtle difference between the Kuat Piston Pro Bike Rack for 2 Bikes #KU76ZR and the Kuat Piston Pro X Bike Rack for 2 Bikes #KU98VR. Overall the two racks are very similar, there are just some subtle differences/upgrades on the Piston…

view full answer...

Thule Ascent 1100 Replacement Cradles

Product Page this Question was Asked From

Continue Researching