Replacement Quick Grip Hardware for an Unknown Thule Roof Box

Question

Question:

There is no identification on the box but I need to replace two clamps and cradles. The box is about 7 ft long. I have in my basket the TH05738 and TH05740

asked by: Jenn

0

Expert Reply:

Thank you for the pictures you submitted. Based on them I was I was able to determine that your box uses the Quick Grip Mount Assembly # TH05738 and the # TH8523387001 for cradles.

expert reply by: Jameson C

0

click to enlarge

Answer 1

Thank you for the picture! So right off I can say that you will need to get more than 1 of the Replacement Cradle #TH8523387001. Since it's a different design than the other 3 I recommend picking up 2 of these and using them for the Quick Grip…

view full answer...

Answer 2

The flat side of the Replacement Cradle for Thule AcuTight and Quick Grip Mounting Hardware part #TH8523387001 will go against the bottom of the cargo box which you can see in the attached photo. Therefore, the screw hole will be facing down towards…

view full answer...

Answer 3

Thank you for sending in the photo to the separate email! Thule has changed hardware from time to time and sometimes hardware is compatible between different boxes. The clamps you have are definitely the Quick Grip Mount Assembly #TH05738 and from…

view full answer...

Answer 4

It is possible that the Replacement Quick Grip Mount Assembly #TH05738 will work on your BMW box, though they have never been tested together and we don't have any type of access to those cargo boxes so it is impossible to make a definitive…

view full answer...

Answer 5

Thankfully, we do have the replacement parts you mentioned for the Thule Force XXL #TH6359B. Part "B" and part "D" from the attached specs picture are the following: - B: Replacement Thule AcuTight Cradle for Thule Roof Mounted…

view full answer...

Answer 6

Sounds like you are looking for the Thule cradle spacer part #TH8523387001 for your Thule Atlantis 1600. This is the spacer that goes between the box and the hardware.

view full answer...

Answer 7

The piece you're speaking of is what Thule refers to as an AcuTight cradle. It isn't included with the #TH94JV fast grip clamp, but is available separately as part #TH8523387001. I've linked to product description videos for the…

view full answer...

Answer 8

You can add the Quick Grip cradle, #TH8523387001, and the mount assembly, #TH05738, but like you have said you will need to make modifications to the box and that will void any warranty on the box and it can also compromise the structural integrity…

view full answer...

Answer 9

I reached out to my contact at Thule to double check the parts you need. If you have the working claw grippers, then you would only need the Replacement Cradle for Thule AcuTight and Quick Grip Mounting Hardware, #TH8523387001, to attach to the claw…

view full answer...

Answer 10

Quick Grip Cradles #TH8523387001 can be installed along with the Quick Grip Mount Assembly #TH05738 on your older Thule Mountaineer Cargo Box, however you will need to make some modifications to the box. Please keep in mind that any modifications to…

view full answer...

Answer 11

The Thule replacement quick grip mount assembly, part #TH05738, is the correct replacement hardware for your Thule Atlantis 1200 roof cargo box. See diagram to the right. The Thule quick grip mount #TH05738 will also work on Thule 1600 and 1800…

view full answer...

Answer 12

The replacement Quick Grip Cradles, #TH8523387001, and the Quick Grip Mount Assembly, #TH05738, are sold in quantities of 1 only. To replace 4 assemblies in a cargo box, you will need 4 of each. You may also need 4 of the Replacement Slide Strips,…

view full answer...

Replacement Quick Grip Hardware for an Unknown Thule Roof Box

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching