Troubleshooting Trailer Blinkers that Only Work When Brakes are Applied
Question:
Hi, I have a 1993 Toyota Pickup, 3.0L V6 engine, I have this connector installed and I have working brake lights, working running lights but problems with my signal lights. If I turn on the signal lights with the brakes pressed they will work properly, if I turn on the signal light without the brake lights pressed they do not work. The lights on this trailer work without issue when connected to another truck that came with a factory installed trailer hitch and wiring.
asked by: Ryan
Expert Reply:
This could be a ground problem. A bad ground connection can cause all sorts of problems. First check the trailer connectors on the vehicle and on the trailer for any dirt or corrosion and clean them out. Corrosion can also build up behind the connectors where the wires attach.
On the vehicle side, make sure that the main ground is attached to a clean bare metal surface on the frame. On the trailer side connector, again make sure that the main ground is attached to a clean metal surface.
Use a circuit tester like # PTW2993 if needed to test the pins on the vehicle connector without the trailer connected to see if the problem is on the vehicle or on the trailer.
I attached an FAQ article on trailer wiring and 4-way installs for you to check out as well.
Products Referenced in This Question
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Correcting Trailer Ground Problem Turn Signals Blink Once and Stop When Brake Is Pressed
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Video: Curt Custom Fit Vehicle Wiring - Trailer Hitch Wiring - C56349 Review
- Shop: Grille Guard
- Shop: Ladder Rack
- Shop: Headache Rack
- Shop: Tool Box
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Shop: Truck Bed Sliding Tray
- Q&A: Replacement LED Top Command Clearance Light With SAE-AP2-16 On Lens For 2018 Sunseeker Motorhome
- Video: Choosing the Right Trailer Wiring
- Article: Trailer Wiring Diagrams
- Search Results: 44649
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Search Results: 68149
- Q&A: Does HBA-CAM Adapter Module for Hydrastar Electric Over Hydraulic Brake Actuators have 2 or 4 Wires
- Video: Choosing the Right Brake Controller
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Difference Between Trailer Tire Sizes ST205/75R15 and ST225/75R15
- Search Results: 25580
- Video: etrailer Class III Trailer Hitch Installation - 2023 Toyota Tacoma
- Shop: Redarc Tow-Pro Liberty Brake Controller - Dash Knob - 1 to 2 Axles - Proportional
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: dust cap
- Article: Trailer Tire Sizing
- Video: Curt T-Connector Vehicle Wiring Harness Installation - 2023 Toyota Tacoma
- Shop: 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- Q&A: Solution for Suspension Sag on 2016 Toyota Highlander Towing Trailer
- Q&A: Will Coil SumoSprings Custom Helper Springs Fit a 2018 Toyota Highlander
on Custom Fit Vehicle Wiring
