What is the Diameter of the Base or Shank of the Gooseneck Trailer Ball # 19309

Question

Question:

What size shank does the 2 5/16 ball #19309 have. I am looking for a 2 5/16 ball with a 2 5/16 shank, i am having trouble finding this ball. Please let me kow if you have one like this or where i can find one. Thanks

asked by: jessie

0

Expert Reply:

The diameter of the base, or shank, of the Hide-A-Goose Gooseneck Hitch Ball, item # 19309, is 2.6 inches, or just under 2-5/8 inches. At this time we do not have a Gooseneck ball with a 2-5/16 inch, base or shank.

expert reply by: Robert G

0

Answer 1

Sounds like you may not have a B and W gooseneck hitch since that brand uses square holes. Could you possibly check under the truck bed to see if you can see a brand? With more info I could see if we have a suitable adapter.

view full answer...

Answer 2

The Curt Pop-In Ball, part #C60629, has a shank with a diameter of 2-1/4 inches and is 3 inches long. It's designed specifically to fit the factory gooseneck hitches that are an option with newer model Fords, GMs, and Nissans. If this is what you…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 6

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 7

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Answer 8

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Answer 9

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

view full answer...

Answer 10

There are a couple of options that'll work great with your Lippert Turning Point Pin Box, however one hitch stands out to me more than others. Take a look at the: -Curt E16 5th Wheel Trailer Hitch - Slide Bar Jaw - 16,000 lbs #C16115 This 5th…

view full answer...

Answer 11

The Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box #GY38FR is not going to allow for any additional turning clearance than the 5th wheel king pin with a fixed point hitch. We have offset gooseneck ball options depending on what type of…

view full answer...

Answer 12

The Gen-Y Hitch 5th Wheel to Gooseneck Pin Box part #GY58GR is primarily designed for long bed trucks. It's no different than a standard fifth wheel pin box in regards to the size. If you were using a fixed hitch and standard pin box before with…

view full answer...

What is the Diameter of the Base or Shank of the Gooseneck Trailer Ball # 19309

Product Page this Question was Asked From

Continue Researching