Will the Rhino Rack Square Bars Work W/ the Rhino Rack Wind Fairing

Question

Question:

Hello I have a 2023 GMC Sierra 1500. Will the rhino rack fairing part RRRF4 work with the rhino rack square bar kit part RR28DP for my vehicle?

asked by: Keith M

0

Expert Reply:

Keith, the Rhino-Rack Fairing for Roof Racks # RRRF4 you're looking at will actually not fit on the Custom Fit Roof Rack Kit # RR28DP.

This is because the wind fairing can fit on bars that are no more than 1 1/4" tall and a 3 1/2" wide, and the Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1500B are just a bit too tall at 1 7/8".

Instead, I'd recommend using the Custom Fit Roof Rack Kit # RR63ZE which uses aero bars that are the same length as the ones you were looking at, and will also work with the wind fairing # RRRF4.

expert reply by: Bryce D

0

Answer 1

Measure the distance between the feet or raised rails on the roof of your vehicle and pick out the Yakima fairing that falls right under that dimension in overall length. We have the part #Y05018 which measures 46 inches long, the part #Y05017 which…

view full answer...

Answer 2

We have a couple of different options that will work with your Sky One-Touch power top but I'd say the best option is going to be with Thule's aerobar setup. You'll need the following components: Thule WingBar Evo Crossbars #TH711520…

view full answer...

Answer 3

Hey there Stormy, I think we can figure this out, as there are a quite a few options. First, let's just discount the heavy-duty rack, as those are just oddly shaped crossbars and there's nothing HD about them (like you mentioned, they have…

view full answer...

Answer 4

The best way to pick out a fairing is to measure the distance between the feet of the roof rack and go with a fairing length that best matches that distance. The Inno fairings are designed to fit most crossbar shapes so those will be your best…

view full answer...

Answer 5

The instructions included with the Thule RV Wheel Levelers #TH307617 do state that the tires should be 20mm narrower than the width of the levelers for even support across the tires. That being said, these levelers are intended for motorhome use and…

view full answer...

Answer 6

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 7

Sorry to hear that, noise typically isn't a major issue with the JetStream bars #Y00425. A fairing will definitely help reduce any whistling as well as drag. Sticking with Yakima, we have the following available: -Yakima WindShield Fairing for…

view full answer...

Answer 8

The Rhino-Rack Roof Rack for Factory Tracks #Y02-490B-NT is going to be your best bet for the tracks on the ARE topper for your 2012 Toyota Tacoma. The weight capacity is 220 lbs like you mentioned, but that's going to be the highest you'll…

view full answer...

Will the Rhino Rack Square Bars Work W/ the Rhino Rack Wind Fairing

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching