Recommended Wiring Harness With 4-Way to Rewire Flatbed Trailer  

The brake controller port on a 2021 Ford F-150 (if equipped) will be located behind the coin tray in the center console. This will be accessed by removing the panel under the steering wheel. I have attached a video which shows this below. For a brake…

Your 4-pin/5-wire wiring harness is what is called a "wishbone" type which simply means that there are two separate running light wires, one brown and one pink. This allows a separate running light wire for each side of the trailer which…

Typically 4-way wiring consists of 18 and 16 gauge wires. For a 4-way that has all 16 gauge wire you would want the Wesbar 4-Pole Flat Connector #W787264. The part #HM38138 uses 18 gauge for all wires but the white that uses 16 gauge.

Hi Chad! There are 2 ways to tell the difference between driver side and passenger side Dexter Axle brake assemblies; the first is by looking at the sticker on the inside, and the second is by looking at the brake assemblies as a whole. For example,…

The 185/80-13 trailer tire size and the 175/80-13 both fit the exact same rim sizes so yes you could go down to the 175 size like the part #TTWTRTM1758013C which is a radial with a higher speed rating of 81 mph.

Yes, it is possible to convert your 7-way on your trailer to a 4-way. To replace the wiring on your Coleman 10 Foot pop up camper we offer wiring adapters that allow connection of different formats of trailer wiring. The best option to change the…

In order for you to tow a travel trailer, you will need a 7-way connector on your 2022 Chevrolet Blazer. This may be a two step process. If you already have a 4-way connector on your vehicle, you can skip the 4-way installation section and go…