What Are The Weight Specifications For the BOLT Trailer Hitch Receiver Lock # BLT99FR?

Question

Question:

Whats the weight specifications for this hitch pin?

asked by: William A

0

Expert Reply:

The BOLT Trailer Hitch Receiver Lock # BLT99FR is rated for a gross trailer weight of 16,000 lbs and a tongue weight of 1,600 lbs. If you are needing something with a higher capacity check out the InfiniteRule Hitch Lock # 34061074-D. This will also fit up to a 3" Ford receiver and has a stainless steel construction. It has a sheer strength rating of 42,000lbs.

expert reply by: Bud M

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 3

Hey Michael, the Grand Design Reflection 100 series 27BH that you are interested in has a Lippert 1621 style pin box so the Goose Box you would want is the part #RP94716 which was designed to fit it. The part #RP94716-61301 is same Goose Box but it…

view full answer...

Answer 4

I'm assuming your 2024 F-250 has the 6-3/4' bed. If that is correct, the right tie-downs are in fact the #TLF3008 and #TL77CR. TorkLift has accounted for the bed access steps on the 2024 model and confirmed these will fit your truck.

view full answer...

Answer 5

I attached a link on this page to the owners manual/install instructions for the Demco Hijacker Autoslide 13k hitch part #DM8550040 that you referenced for you to check out.

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Hey Buddy, so the Fastway Adjustable Ball Mount part #DTSTBM6825-2S is a really great choice for the 2-1/2 inch hitch of your 2021 Ford F-250 which is going to be very solid in your hitch due to it's built in anti-rattle device that is easy to…

view full answer...

Answer 8

The B&W Continuum #BW78FR and the Reese Strait-Line #RP66083 are both great systems. The B&W Continuum is going to be easier to set up, but as far as sway control goes, I definitely have to give the edge to the Reese Strait-Line. The…

view full answer...

Answer 9

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

We do have the Gen-Y Hitch Gooseneck Trailer Hitch #GY43XR which installs into your factory in bed hitch on your 2024 Ford F-250. This will provide you with a 2-5/16" hitch ball which is offset 5" from the factory mounting location. You…

view full answer...

Answer 12

Hey MIchael, some play like that is normal with the Gen-Y ball part #GY43XR so I wouldn't worry too much about it.

view full answer...

What Are The Weight Specifications For the BOLT Trailer Hitch Receiver Lock # BLT99FR?

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching