bing tracking image
Q & A Icon

Troubleshooting A Progressive Dynamics # PD4560LICSV That's Putting Out 13.66v For A Lithium Battery  

Question:

I ordered this converter and installed it today PD4560LICSV. Its puting out 13.66v currently. I thought it would put out a constant 14.6v and the bms on the lifepo4 batteries would control the charge. Will it only put it the 14.6v when the batteries bms decides it needs a charge?

0

Expert Reply:

Hey Brandon,

The Progressive Dynamics # PD4560LICSV has a lithium jumper on the circuit board that is most likely in the 'WIZ' position instead of in the 'LI' position. In the WIZ position this converter section will utilize the charge wizard feature and send 13.2 - 14.4 volts to the battery bank. Take a look at yours and make sure it's in the Lithium (LI) position. If it is and you're still only getting 13.66 volts then let me know and we can see if it's the battery's BMS limiting the voltage.

expert reply by:
0
Kevin C
PD4560 Converter Section Lithium Jumper
PD4560 Converter Section Lithium Jumper
(click to enlarge)

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>