Which Bearing Kit Will Fit The Dexter 6,000LB Axle # 7461121-EB?
Question:
Unsure about which spare bearing, seal and nut/washer set will be the correct one for this axle, please? BK3-110 fits, but shows a different nut/washer combination ?
asked by: Matthias H
Expert Reply:
You are correct the Bearing Kit # BK3-110 does contain the correct bearings, races and grease seal for the Dexter Axle # 7461121-EB. But this does use the Spindle Nut Kit # RG05-100. You can order all the parts separately if you wish so you do not have extra parts you won't need. All of the components below will fit one hub.
Inner Bearing # 25580
Inner Race # 25520
Outer Bearing # 15123
Outer Race # 15245
Grease Seal # GS-2125DL
Washer # 5-23
Nut # 6-191
Retainer # 6-190
Products Referenced in This Question
Replacement Trailer Hub Bearing - 15123
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing 15123
- Race 15245
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- etrailer
more information >
Replacement Race for 15123 Bearing
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 2.441 Inch O.D.
- Bearing 15123
- Race 15245
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- etrailer
more information >
Replacement Race for 25580 Bearing
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 3.265 Inch O.D.
- Bearing 25580
- Race 25520
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - 25580
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.750 Inch I.D.
- Bearing 25580
- Race 25520
- 10000 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- 9000 lbs Axle
- etrailer
more information >
Replacement Nut Retainer for 6-191 Jam Nut
- Accessories and Parts
- Trailer Spindles
- Spindle Nut Retainer
- 1 Inch I.D.
- Dexter
more information >
Replacement Trailer Spindle Jam Nut
- Accessories and Parts
- Trailer Spindles
- Spindle Nut
- 1 Inch I.D.
- Redline
more information >
Bearing Kit, 15123/25580 Bearings, GS-2125DL Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing 15123 and 25580
- Race 25520 and 15245
- 6000 lbs Axle
- etrailer
more information >
Grease Seal - Double Lip - 2.125" ID - 3.376" OD - GS-2125DL
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.125 Inch I.D.
- 3.376 Inch O.D.
- etrailer
more information >
Spindle Nut Kit for EZ Lube Axles
- Accessories and Parts
- Trailer Spindles
- Spindle Nut
- 1 Inch I.D.
- Redline
more information >
Product Page this Question was Asked From
Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern - 95" - 6,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- Electric Brakes
- 6000 lbs
- 6 on 5-1/2 Inch
- 80 Inch Long
- 95 Inch Long
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Shop: Bearing Kit, 14125A/ 25580 Bearings, 10-36 Seal
- Shop: Dexstar Steel Spoke Trailer Wheel - 15" x 6" Rim - 6 on 5-1/2 - Silver Powder Coat
- Shop: Easy Grease Trailer Hub and Drum Assembly for 6K Axles - 12" - 6 on 5-1/2 - Galvanized
- Shop: Aluminum Liger Trailer Wheel - 16" x 6" Rim - 6 on 5-1/2 - Gunmetal
- Shop: Kenda Karrier ST225/75R15 Radial Tire with 15" Black Galvstar - 6 on 5-1/2 - Load Range D
- Shop: Mounting Bolts and Hardware for 12" Single Brake Assembly
- Shop: Dexstar Conventional Steel Wheel - 15" x 6" Rim - 6 on 5-1/2 - Black Powder Coat
- Search Results: trss300
- Search Results: trailer axle nut
- Search Results: #42
- Search Results: trailer spindle nut
- Search Results: brkh12
- Q&A: Bearing Inner Diameters of Trailer Hub # AKHD-655-6-G-EZ-K
- Q&A: Comparing Trailer King RST To Kenda Loadstar ST Tires
- Q&A: Steel 16" Trailer Wheels With 6 on 5-1/2" Bolt Pattern
- Q&A: Does AKHD-655-6-EZ-K Pre-Lubed 3500 lb Hub Drum Need Additional Grease Before Installation
- Q&A: What is Backspacing of Aluminum HWT Series S5 Trailer Wheel AM22658HWTB
- Q&A: Center Cap Recommendation for the Taskmaster Rim part # TA73VR
- Q&A: Galvanized 6 Lug Trailer Hub For a Spindle With 2.125 Grease Seal and 1.75/1.25 Bearing Sizes