Adding 7-Way And Brake Controller To A 2024 Toyota Tundra Without Factory Tow Package

Question

Question:

Purchasing a 2024 Toyota Tundra SR without tow package. Need to add a brake controller and 7 pin plug to back of truck. What parts do I need?

asked by: Robert J

0

Expert Reply:

Hello Robert, we can definitely help set you up with a 7-pin plug and brake controller for your 2024 Toyota Tundra SR Without the tow package. You can use the ZCI Circuit Protected Vehicle Wiring Harness # 119250KIT along with the Universal Install Kit # ETBC7. This will include all of the components needed to wire the 7-way, including all of the necessary wires for a brake controller.

For the Brake controller I recommend the Redarc Tow-Pro Liberty # RED52VR. mainly because it is easy to use, and the controller will be completely hidden behind the dash. All you will see is the LED control knob, so it will look good inside your new truck.

I have linked a few install videos for your below.

expert reply by: Jesse M

0

Answer 1

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

The best brake controller option to go with is one that activates the brakes proportionally instead of time delayed. A proportional brake controller will activate the trailer brakes at the same time and with the same intensity as the tow vehicle…

view full answer...

Answer 4

The first thing you will need for your 1999 D250 is a 4-way. The Curt T-Connector Vehicle Wiring Harness #C55317 plugs into the connection points behind your rear bumper and will allow you to power your trailer's signal lights. Once the 4-way…

view full answer...

Answer 5

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only…

view full answer...

Answer 6

For your 2024 Hyunda Santa Cruz we have the Curt 7-way kit part #C68JR that is a confirmed fit. This installs by plugging into a factory wiring connector on your vehicle which means a really easy install that doesn't require any splicing.

view full answer...

Answer 7

Sure thing, I will go ahead and list out what you need for your 2023 Kia Sportage to add a 7-way for a brake controller so you can tow with the Curt Trailer Hitch Receiver #C94WR: - T-Connector Vehicle Wiring Harness with 4-Way Flat Trailer…

view full answer...

Answer 8

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Adding 7-Way And Brake Controller To A 2024 Toyota Tundra Without Factory Tow Package

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching