Will the Air Lift Load Lifter 1,000 Work W/ A 2024 Jeep Wrangler W/ 4" Lift

Question

Question:

Can you tell me if this AL60829 will work on a 2024 Jeep Wrangler Rubicon that has a 4inch suspension lift? What is the maximum height of the inflated air bags? I have a 2inch sag when transporting a standup jet ski off of the hitch. The second picture is of an older Jeep but I am now hauling the same ski with a newer Jeep. Thank you for your help. Tom

asked by: Tom

0

2024 Jeep Wrangler
(click to enlarge)

Expert Reply:

Tom, the Air Lift 1000 Air Helper Springs for Coil Springs # AL60829 will work with your Wrangler, but you're going to need to also use the 2" spacer # AL52420 since you have a 4" lift.

expert reply by: Bryce D

0

Answer 1

The Air Lift 1000 Air Helper Springs for Coil Springs part #AL60829 which are a fit for a 2021 Jeep Wrangler are only confirmed for factory coil springs. If you have aftermarket coil springs as part of your lift we cannot confirm fit. That said, I…

view full answer...

Answer 2

Yes, the Air Lift 1000 kit part #AL60829 is a fit for your 2018 Jeep Wrangler Rubicon. As long as you use the included spacers it will be at the correct height for your vehicle. There's no need for any additional spacers.

view full answer...

Answer 3

I highly recommend going with the Air Lift LoadLifter 5000 Air Helper Springs #AL49DQ over their Ride Control system for your 2023 Toyota Tacoma 4WD because they not only offer more support, but they also have a better construction so…

view full answer...

Answer 4

No, It does not because item #AL25804 is for air shocks but I have one that does. The Air Lift Load Controller II Compressor System for Air Helper Springs item #AL25592 has a minimum pressure setting of 5 psi which can be adjusted to 10 psi.

view full answer...

Answer 5

The SumoSprings Solo Custom Helper Springs for Jeep - Front Axle - Off-Road - 2" Lift Spacers #SSF-403-54 has a height of 3.800 inches. The #SSR-401-47 has this same height with a 1000 lb capacity , where the #SSR-405-47 has a height of 4.5…

view full answer...

Answer 6

Yes, the silver button you see to the right of the gauge on the Air Lift Compressor part #AL25804 is used for releasing the air pressure in the air bags.

view full answer...

Answer 7

That is correct. If your 2021 Wrangler Unlimited has the connector located under the dash to the left of the steering column near the top of the e-brake pedal as shown in the provided photo, you'd use the #3073-P harness to connect the #90195…

view full answer...

Answer 8

I took a look at the online version of your 2014 Ram 2500 owner's manual. It looks like there should be a 30 amp pink fuse located in the F11 position inside the power distribution box (under the hood). This particular fuse is for the integrated…

view full answer...

Answer 9

Yes, the Replacement 2" and 2-5/16" Dual-Sided Ball part #C45923 will work with the Curt Pintle Hook with 2-5/16" Ball part #C45908.

view full answer...

Answer 10

The Blue Ox Adjustable Ball Mount with Pintle Hook for 2-1/2" Hitch #BLU25XR and the Curt #C45908 are identical. According to Blue Ox and Curt they don't make the parts for each other so in theory it is not the exact same part, just the same…

view full answer...

Will the Air Lift Load Lifter 1,000 Work W/ A 2024 Jeep Wrangler W/ 4" Lift

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching