MORryde Cushioned Pin Box that Can Fit in Place of Leland 7900

Question

Question:

Will this Moride part # fit my Leland 7900?

asked by: Gregg E

0

Leland 7900
(click to enlarge)

Expert Reply:

Yes, the MORryde Cushioned Pin Box part # MR52VR will bolt up in place of the Leland 7900 which we have determined is the same as the Leland 7910 which has same dimensions and bolt pattern as the 7920 that this was confirmed to fit.

expert reply by: Jameson C

0

Answer 1

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 2

The length of wire desired depends on your vehicle connection and your personal preference. You want enough slack for turning, but not so much for dragging as you mentioned. A little extra slack isn't a problem and not enough could lead to…

view full answer...

Answer 3

It sounds like you are on the right track for tracking down where the issue is. That said, the integrated brake controllers they were putting in trucks around 2008 weren't as reliable as the ones they've been installing since then.…

view full answer...

Answer 4

You would be able to go to the larger tire size of 235/75R17.5 like the part #P35175 to replace what you have and you would have additional weight capacity which could help with the blow outs you are having. You did mention all of the usual…

view full answer...

Answer 5

Since the bolt holes line up vertically and horizontally you'll be able to bolt the Trailair Air Ride 5th Wheel King Pin - Leland 7920 #UF35-946208. This specific pin box actually has an 18" king pin to first set of bolt holes…

view full answer...

Answer 6

I took a look at the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 that you mentioned and it's actually going to be a fit for the Lippert 1621 and 1621 HD 5th-wheel pin boxes, and not your Leand 7920, however I do have another…

view full answer...

Answer 7

The Lippert/Trailair pin box that fits the Leland 7920 is #UF35-946208.

view full answer...

Answer 8

It sounds like you have a Leland 7920 pin box. This matches all of the specs you gave except the 2b measurement which is the height different between one set of bolt holes to the row that is either one set higher or one set lower. The Leland 7920…

view full answer...

Answer 9

Since your 2021 Ram 2500 has the 6-1/2' bed the B&W Companion Gooseneck-to-5th Wheel Hitch Adapter #BWRVK3500 will more than likely not allow you a full 90 degree turning radius. With that said it can be sometimes made to work if the…

view full answer...

Answer 10

We have previously confirmed with the manufacturer that the Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter #DM8550045 will only work with a gooseneck ball that is flush to the truck bed. So you will need to use the standard…

view full answer...

MORryde Cushioned Pin Box that Can Fit in Place of Leland 7900

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching