Is LMX Red Grease Compatible With Lucas Red N Tacky

Question

Question:

Ive been using LMX red grease in my boat trailer bearings but Im just wanting confirmation that this is acceptable? Can I mix with Lucas Red N Tacky?

asked by: Michael W

0

Expert Reply:

It is acceptable and highly water insoluble so it is great for boat trailers. Grease like the LubriMatic LMX Industrial Strength Grease # L11390 is a lithium complex. The same is true for Lucas Red N Tacky which means they are compatible.

expert reply by: Robin H

0

Michaelgame. W.

3/6/2024

THANKS!!

Reply

Answer 1

The great thing about LMX red grease like the part #L11390 is that it will be compatible with basically whatever grease you have in the hubs of your Forest River Rockwood and definitely works with what you have now. I'd go with this grease and…

view full answer...

Answer 2

The LMX #L11390 red grease is a lithium complex grease that has a #2 viscosity index.

view full answer...

Answer 3

I can help you with greasing up your EZ Lube Axle. First thing I would check would be that the grease is not coming out of the back of the axle through the seal. If this is the case you will need to replace the seal. Our tubes like #L11390 have 14…

view full answer...

Answer 4

I recommend the LubriMatic LMX Industrial Strength Grease #L11390 for your Dexter axle on your 2021 Vista Cruiser Travel Trailer. This grease is specifically formulated to work in extreme hot and cold temperatures under high pressures. It is also…

view full answer...

Answer 5

Standard tapered trailer wheel bearings are recommended to be re-packed with fresh bearing grease about every year or every 12,000 miles under normal use. In certain conditions this interval could be shorter, such as if you routinely tow the trailer…

view full answer...

Answer 6

Hey Eugene, the LMX RED grease like part #L11390 is the best option. It's the most heavy duty, waterproof, and is compatible with basically all greases. I would be cautious not to over fill the hub though as it's pretty easy to blow out seals…

view full answer...

Answer 7

When adding grease like the #L11390 you want to pump the grease slowly and rotate the hub. You will continue to pump the grease until you begin to see grease come out of the front. If you're replacing old grease, you will continue to pump until…

view full answer...

Answer 8

Keep pumping grease into the fittings until you start to see a little grease seeping through the outer bearing. This means that you have packed as much grease as will fit into your spindle. Be sure to check that the grease isn't coming out the…

view full answer...

Answer 9

I recommend using the LubriMatic LMX Industrial Strength Grease #L11390 on the Wet Bolts #LC52SV for the Road Armor Shock Absorbing Equalizer Kit #LC696740. This grease is formulated for superior performance in cold and hot climates. It is also…

view full answer...

Answer 10

I empathize with you because accidents do happen but if grease got on the brake shoes of your Hydraulic Trailer Brake Kit #AKUBRK-35-D to be safe you need to replace the shoes in order to ensure proper braking. For that you will need two of the…

view full answer...

Answer 11

Yes, you can clean the trailer brake magnets and other components on the Dexter Nev-R-Adjust Electric Trailer Brake Kit #K23-478-479 with brake cleaner. Be sure to dry the surfaces before reassembly.

view full answer...

Answer 12

You just need to pack the bearings on hub and drum assembly #8-276-5. There's no such thing as too much grease for bearings! If it is an EZ lube hub with a grease zerk fitting at the end of the spindle you will know there is enough grease once it…

view full answer...

Is LMX Red Grease Compatible With Lucas Red N Tacky

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching