Will Yakima OverHaul HD Fit 2023 Jeep Gladiator With BAK Revolver X4s Hard Tonneau Cover

Question

Question:

Will the yakima overhaul hd truck bed rack system with smart slot kit work with the t-slots on a bak revolver x4s hard tonneau cover?

asked by: Kevin S

0

Expert Reply:

The BAK Revolver X4s Hard Tonneau Cover # BAK88ZR doesn't come with rails that have T-slots so I'm not entirely sure what you have on your 2023 Gladiator. The cover is compatible with the TS Rails for TruXedo Elevate Rack System # TH25FR. If these are the rails you have on your Jeep then you can use the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack # Y01151-5855.

expert reply by: Robin H

0

Kevin S.

2/22/2024

The 2023 Revolver X4s does come with what I believe are t-slots.

Reply

Robin H.

2/22/2024

@KevinS I wasn't doubting that you had the rails, I just didn't know who actually manufactured them. After speaking with BAK Industries I found out they do in fact make the rails. These are relatively new and exclusive to the Gladiator, at least for now. They're still in the process of rolling out the rails for other companies outside of their parent company which is why I had no knowledge of it. After getting through to their engineers we established that the Yakima OverHaul HD is compatible with the BAK rails.

Reply

Answer 1

The BAK Revolver X4 is not going to work with the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack w/ Tonneau Cover Adapters #Y01151-5855, you'd need to use either the Retrax XR, Ford Embark LS, or the Pace Edwards UltraGroove.

view full answer...

Answer 2

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

The first thing you'll need to flat tow your 2015 Chevy Malibu LS is a base plate kit like the Roadmaster part #RM-523178-5 that is a confirmed fit. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting,…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Here are the steps to prepare your 2023 Ford Bronco Big Bend for flat towing. The transfer case and transmission will be in neutral with the ignition off. This information is in your owners manual. Switching Neutral Tow On 1.Switch your vehicle to…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 11

I've dealt with this issue in the past and Roadmaster stated that there shouldn't be more than 1/8" gap, otherwise you'll get two much play and can start to get friction. Since you're right at 1/8" with the #RM-035-1…

view full answer...

Answer 12

I have a solution for you, however, I would not recommend mounting a tow bar directly to a bumper on a Jeep, whether it is OEM or an aftermarket bumper. Jeep does not recommend towing the Wrangler with the OEM bumper because it was not designed to…

view full answer...

Will Yakima OverHaul HD Fit 2023 Jeep Gladiator With BAK Revolver X4s Hard Tonneau Cover

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching