Will The RAS Suspension Enhancement System Work On A 2019 Toyota Tundra With Icon Leaf Springs

Question

Question:

I have a 2019 toyota tundra sr5. I have aftermarket icon rear leaf springs. Would RAS34FR still work on these leaf springs?

asked by: Tim

0

Expert Reply:

Hi Tim,

Yes, the RoadActive Suspension Custom Leaf Spring Enhancement Kit # RAS34FR would still work with your Icon aftermarket leaf springs. This system simply clamps to the leaf spring stack at the center and the opposite side eyelet to act as an extra leaf spring on the stack and provide more support for heavy loads.

expert reply by: Kevin C

0

Answer 1

Since the RoadActive Suspension Custom Leaf Spring Enhancement Kit #RAS34FR only connects to the rear leaf spring on your 2018 Toyota Tundra it will still work with the 2" block you have between the leaf spring and the axle.

view full answer...

Answer 2

From a fitment standpoint, RAS #RAS34FR generally fits lifted trucks like your 2009 Toyota Tundra without an issue as long as this is a block style lift. An issue may arise if the lift block is fabricated in an odd shape that interferes with our axle…

view full answer...

Answer 3

Yes, you can use a 1 inch Timbren spacer, #A25723-90AH00, with a 1/2 inch spacer, #TA25722-90P00, to get to the height you need for your 2015 Toyota Tundra.

view full answer...

Answer 4

The RoadActive Suspension system #RAS34FR effects the suspension, so it will work with any body lift that you may have in place. The RAS system will lift the rear of the vehicle approximately 1" to 1-3/4" depending on the truck, so the bed…

view full answer...

Answer 5

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 6

If the 1 inch lift at the back of your 2007 Toyota Tundra increased the distance between the frame and the axle, also by 1 inch, then you might need a spacer kit. The shortest spacer kit for Firestone Ride-Rite air bags is 1-1/4 inches, #F2536. What…

view full answer...

Answer 7

When installing suspension enhancement on your 2019 Toyota Tundra that a 6 inch lift The RoadActive Suspension #RAS4611TD will work for you as long as the leaf springs are stock, if not The Timbren Rear Suspension Enhancement System #TTORTUN4 will…

view full answer...

Answer 8

Whenever you creep up close to a truck's towing capacity the travel experience is going to suffer, even though it's technically still safe and within the manufacturer's restrictions. Having a 2,000 pound safety margin through still leaves…

view full answer...

Answer 9

Hello Donald, thanks for reaching out. We do offer a sidewinder kingpin to replace the RBW 7019 pin box, the Reese Sidewinder 5th Wheel King Pin with Rotating Turret #RP77FR. This is currently the only aftermarket sidewinder that will work with the…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Will The RAS Suspension Enhancement System Work On A 2019 Toyota Tundra With Icon Leaf Springs

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching