Correct Firestone Lift Spacer for a 2010 Nissan Titan Pro 4X With a 3" Lift

Question

Question:

2010 Nissan Titan Pro 4x with 3 inch lift kit on....what will I need to install airbags to stop my sag from hauling heavy trailers?

asked by: Tyler G

0

Expert Reply:

For your 2010 Nissan Titan Pro 4X with a 3" lift you're going to need to use the Lift Spacers for Firestone Ride-Rite Air Helper Springs # F2368 to be able to use the Firestone Ride-Rite Air Helper Springs # F2355.

expert reply by: Bryce D

0

Answer 1

For your 2007 Nissan Titan SE 5.6 with a 4inch lift, you will need an adapter to use the Firestone Ride-Rite Air Helper Springs - Double Convoluted - Rear Axle, #F2355. You will need the Lift Spacers for Firestone Ride-Rite Air Helper Springs -…

view full answer...

Answer 2

There is not a predetermined method for adjusting the psi when using air bags on your 2015 Ram 1500 with a weight distribution hitch; the answer is really just adding air and testing different levels so you can find the right psi. The good news is…

view full answer...

Answer 3

We do have the Rhino-Rack Masterkey Lock Barrels #RRRK093-2 which will provide you with 2 new lock cores and keys for your Rhino-Rack Zenith MasterFit Rooftop Cargo Box #RRRMFZ66. As far as pricing goes on the different sets they can change based on…

view full answer...

Answer 4

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Answer 5

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 8

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 9

I checked with Curt and they do show the Curt Trailer Hitch Receiver part #C13233 as a fit for a 2022 Volvo XC90 All Models which includes the Recharge.

view full answer...

Answer 10

That spindle looks pretty well destroyed so best option is going to be to replace the axle. You are going to need to measure your current axles in a few places to get the correct one as we don't have access to what your numbers reference. You…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

I recommend going with the Air Lift LoadLifter 7500 XL Ultimate Air Helper Springs #AL89DQ for hauling around an in-bed camper with your 2024 Ford F-350 Super Duty. I really like this kit because it has the higher 7,500 lb rating (which you don't…

view full answer...

Correct Firestone Lift Spacer for a 2010 Nissan Titan Pro 4X With a 3" Lift

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching