Does Flint Hill Goods Ladder Rack FHG64ZR Fit Ford Maverick

Question

Question:

I like this rack, but I would want it shorter for a ford maverick. Can the uprights be cut and new holes drilled for the bed rail brackets?

asked by: Tim

0

Expert Reply:

Hey Tim, so the Flint Hill Goods ladder rack part # FHG64ZR does fit the Ford Maverick as-is so you wouldn't need to cut down the uprights to allow it to fit. If you wanted to cut them down I am sure there is a way to pull that off but I don't have specific instructions on how to do that. I do believe what you mentioned would be correct though, you would need to drill new holes.

expert reply by: Jameson C

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

The instructions for the Demco Tabless Base Plate Kit #DM77YV are being added to page but I'll also send them to you separately. In the instructions they only show that the air dam needs a chunk cut out and that the shutters would remain. The…

view full answer...

Answer 3

The best adjustable height ladder rack for your 2023 Ford Maverick that is compatible with a tonneau cover is the Yakima OverHaul HD part #Y01151-57555. This comes with adapters designed to fit the T-slots of the RetraxONE XR part #RTX83QR which is a…

view full answer...

Answer 4

You have a good eye Richard, as there is not a difference between the etrailer and Demco base plates that fit your 2024 Ford Maverick: - etrailer Invisible Base Plate Kit e64FV - Demco Tabless Base Plate Kit #DM77YV Both will fit your '24…

view full answer...

Answer 5

Okay Bob, so I did a bit of digging around and apparently this is a known issue that Blue Ox is aware of. The 41" distance between the mounting points is too wide and non-standard which is why your tow bars are being stretched too far.…

view full answer...

Answer 6

The Telescoping Rack for TruXedo Elevate Rack System #TX24NV uses crossbars which are 3.79" wide, 1-1/2" tall and 67" long.

view full answer...

Answer 7

Yes, it does! The Yakima OverHaul HD Adjustable Truck Bed Ladder Rack item #Y01151-57 has been confirmed to fit the 2024 Ford Maverick. This ladder rack system has a no drill installation and a 500 lbs capacity. The uprights heights can be adjusted…

view full answer...

Answer 8

In regards to the base plate kit options for a 2022 Ford Maverick, the Blue Ox Base Plate Kit part #BLU88XR requires the least amount of modifications as there is no cross tube like on the Roadmaster Direct-Connect Base Plate Kit part #RM97RR. That…

view full answer...

Answer 9

Yes, we have the Curt Trailer Hitch Receiver #C84BR which is confirmed to fit your 2024 Ford Maverick. This will provide you with a 2" receiver. We also have the Curt 4-Way #C59496 which will allow you to connect to most small utility trailers…

view full answer...

Answer 10

There have not been any major changes to the Stay-In-Play system since 2016, so I believe it certainly would be worthwhile (and a $$$ saver) to remove the major parts from the now-wrecked car. Provided you can get that done for a reasonable cost.…

view full answer...

Answer 11

Congrats on the new car. I can definitely help set you up with everything you need. Lets start with the base plate and work our way from there. For the 2023 Maverick I recommend using the Roadmaster direct connect #RM97RR. Roadmaster make a great…

view full answer...

Answer 12

Although it's not said, to install the Demco Tabless Base Plate Kit #DM77YV there may be some trimming of spoiler, air dam, grille or plastic fascia required depending on the model of this vehicle. To complete your flat towing setup, you're…

view full answer...