Recommended Anti-Sway Bars For A 2018 Ford F-350 XLT

Question

Question:

Hi,I have a 2018 Ford 350 XLT super duty and I’m looking for a sway bar to install at the back and I found this Item # RM-1139-176 ,I choose this item because it’s easy to install, I think. Please let me know,Thank you very much.

asked by: Lito

0

Expert Reply:

The Roadmaster Front Anti-Sway Bar # RM-1139-176 isn't a fit for your 2018 Ford F-350 but Roadmaster does have a rear anti-sway bar that is confirmed to fit with part # RM-1139-173. If your factory bar is missing or the end links are in need of replacement then you'll want part # RM-1139-173-00 instead to get everything. If you want to replace your front anti-sway bar as well then you'll need part # RM-1139-180 as well.

As far as installation goes, these are fairly easy installations that you can complete at home with the proper equipment (torque wrench, jack, jack stands, etc.). I've attached a short video below where Dave will walk you through the installation process for the rear sway bar.

expert reply by: Kevin C

0

Answer 1

Going with a heavier sway bar on the front and rear of your 2014 Ford F-350 will help improve handling and stability when towing your fifth wheel trailer. For the rear you would want the part #RM-1139-173-00, for the front you would want the part…

view full answer...

Answer 2

For a rear sway bar that fits your 2018 Ford F-250 that does not have a current sway bar you'd want the Roadmaster part #RM-1139-173 and/or for the front you'd want the part #RM-1139-180.

view full answer...

Answer 3

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Roadmasters priority when it comes to their sway bars is top notch quality and the easiest install for the customer. This typically cuts the install time down enough that you end up saving money if you pay to have the bars installed or decide to do…

view full answer...

Answer 7

Hello Steve. I do have a good solution for you, but I cannot recommend using the Malone Adapter #MPG544. Since it is rated for towing only 4,000 lbs, your 8,000 lb towed vehicle would be double the max towing capacity. You are right about there being…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

I can definitely help and point you in the right direction. Both brands make a great quality air bag kit. Personally I prefer the Firestone Ride-Rite #F2709. The air bags themselves are known to be more durable than others. They can hold more PSI…

view full answer...

Answer 10

Hey David, actually what is going to make the biggest improvement in handling and stability for your 2011 Itasca is an upgraded rear sway bar with the part #RM-1139-175. I know that's not what you asked about but for motorhomes where most of the…

view full answer...

Answer 11

Hey Patrick, so for your leaf spring upgrade I am going to need to know a couple of things before I can get you over to the right part. Specifically, the length from eye to eye, the spring width, leaf thickness, and the number of leaves. From here I…

view full answer...

Answer 12

Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…

view full answer...

Recommended Anti-Sway Bars For A 2018 Ford F-350 XLT

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching