What Does "No Lockout" Mean?

Question

Question:

What that No Lockout means?

asked by: Costa,Claudio

0

Expert Reply:

"No Lockout" means that this particular actuator # T47457007K does not have a built-in reverse lockout. Meaning that driving the trailer in reverse will actuate the brakes. You can add a reverse lockout to the actuator by adding a Reverse Lockout Solenoid # T4748800. Alternatively, you could also use free backing brakes such as part # AKFBBRK-35-D. The free backing design allows for backing up without engaging the trailer brakes.

expert reply by: Jesse M

0

Answer 1

I like the whole heavy duty overkill aspect of a build. I see no reason why you wouldn't want to install the Titan Brake Actuator #T1735200. This way you know that your M116A3 Military Trailer is tough enough for anything you throw at it. As…

view full answer...

Answer 2

A brake actuator with a manual lockout, like part #T63FR, will have a lockout lever on the actuator that prevents the internal spring and shock from engaging the master cylinder when backing up (see photo). A no lockout brake actuator, like part…

view full answer...

Answer 3

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

view full answer...

Answer 6

Hey Richard, thanks for reaching out! The Dexter DX7.5 Drop-N-Go Brake Actuator #099-175-00 is a great option for a replacement actuator because it's a direct replacement for the common Model 60 actuators that were popular in the '90s.…

view full answer...

Answer 7

Yes, the Dexter Brake Actuator part #T47457007K that you referenced is a replacement for your Titan Model 60 actuator.

view full answer...

Answer 8

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 9

There really isn't a particular maximum trailer weight that is used to determine when brakes need to be added to both axles of a tandem axle setup. While I do still recommend checking your local laws, I am also not aware of any general laws that…

view full answer...

Answer 10

The Dexter Zinc-Plated Brake Actuator #T47457007K does not have an access hole to insert a screwdriver to bleed the master cylinder. You will have to use the old method with a 2x4 and the safety chains. While the trailer is disconnected from the…

view full answer...

Answer 11

Yes, if you inserted a rod into the hole that in front of the housing of the actuator of the part #DM72VR that would work as a manual lock out and allow you to reverse the trailer.

view full answer...

Answer 12

The Titan Actuator part #T47457207K should have came with instructions but sometimes like anything they get misplaced before shipping. With the reverse lock out solenoid basically one of the wires runs to the reverse light circuit of the vehicle and…

view full answer...

What Does "No Lockout" Mean?

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching