Can Hub # 42660UC1 Be Converted To Fit a Spindle # TRU57FR?

Question

Question:

I bout TRU67fr 6000 lb spindle and 42660uc1 6 on 6 6000 lb ag hub. The hub doesn’t fit on the spindle could you get me parts numbers for bearing and races, and the grease seal that will make this work

asked by: Bryce O

0

Expert Reply:

You are either going to get a different Spindle # TRU57FR or Hub # AH60880FCOMP as there is not a set of bearings and races we carry to make the Hub # 42660UC1 fit on the Spindle # TRU67FR. Since you most likely already have the 6 on 6" wheels and tires it makes the most sense to change to the Spindle # TRU57FR and keep the Hub # 42660UC1.

expert reply by: Bud M

0

Answer 1

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 2

Hey Mark, since we know your Brinkley Z3100 has the Rhino style pin box, the correct Gen-Y fifth wheel to gooseneck adapter is the part #GY98GR which comes with the auto latch you mentioned wanting as well!

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 5

The B&W Companion OEM 5th-Wheel Hitch for Ford Super Duty Prep Package - Dual Jaw - 20,000 lbs #BWRVK3300 is a confirmed fit for your 2017 Ford F-350 with factory rail kit for 5th wheel. This hitch weighs just under 150 lbs. It does come in…

view full answer...

Answer 6

Hey Bob, thanks for writing in, and you got yourself one heck of a truck with the 2024 Silverado 2500HD. And though you'll need an adapter since you have the factory prep package you can definitely use the Andersen Ultimate Connection 5th Wheel…

view full answer...

Answer 7

If you have the Gooseneck versions of the Curt CrossWing ( #C92DR or #C32DR) you unfortunately would not be able to use the Rota-Flex with it. The pivoting head causing too much strain for the single point of contact you have with a gooseneck hitch.…

view full answer...

Answer 8

Yes there is! The Husky 31326 hitch is made to fit the industry standard fifth wheel rails (ISR). The Curt Adapter #C88KR is also made to the same industry standard measurements. So the Curt Adapter #C88KR will be exactly what you need to use your…

view full answer...

Answer 9

The Westin Custom Fit Truck Bed Mat #W55XV is the best option for your 2024 GMC Sierra 1500 with the 5-3/4' bed because it has a thick durable rubber construction as well as grooves running front to back of the bed to make it easier to clean out…

view full answer...

Answer 10

Hey Vernon, so the puck systems of the Ram and Chevy trucks are different so you wouldn't be able to use your current B and W Companion slider as-is in the bed of your 2024 Chevy Silverado 3500. So if you wanted to reuse the head from your…

view full answer...

Answer 11

The best way to prevent any clearance issues with your 2022 KZ Durango Gold G356RLQ and your 2020 Chevrolet Silverado 2500 with 6-1/2' bed and factory puck system is by using the Demco Autoslide 5th Wheel Hitch #DM79GV. This hitch slides back and…

view full answer...

Answer 12

While it is recommended to use a sliding 5th wheel for a short bed truck so that you have plenty of clearance for sharp turns, it is not necessarily required as it depends on your truck and trailer configuration. If you are using the same trailer…

view full answer...