Do You Have a 3,500LB Axle with 4" Drop and 5 on 4-1/2" Bolt Pattern with Electric Brakes, 95" Hub F
Question:
3.5. 4 inch drop axel...4.5 bolt pattern. Electric brakes. Frame is 7ft wide. 95 hub to hub. 81 inch center of spring..how much to get it made and how long...also need 1 tear fender
asked by: Kirk H
Expert Reply:
All of our 3,500LB, 4" drop axles with 95" hub face like our etrailer Axle # e45SR you found are going to have a 80" spring center. As we do not offer custom axles you can easily have the springs seats removed and 2 new Seats # TRSS238 installed at your 81" spring center. This is typically cheaper and much faster than ordering a custom axle from a local dealer.
I recommend upgrading to the U-Bolt Kit # CE23002 with galvanized spring plates and zinc coated hardware to resist corrosion.
Products Referenced in This Question
CE Smith U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts - Zinc
- Trailer Suspension Parts
- U-Bolt Kits
- Boat Trailer
- Snowmobile Trailer
- 3500 lbs
- Round Axle - 2-3/8 Inch
- 1/2 Inch Diameter
- 5-1/2 Inch Long
- CE Smith
more information >
Spring Seat for Typical 3,500-lb, Round Trailer Axles with 2-3/8" Diameter
- Trailer Suspension Parts
- Spring Seats
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Round Axle - 2-3/8 Inch
- TruRyde
more information >
Product Page this Question was Asked From
Trailer Axle w/ Electric Brakes - 4" Drop - 5 on 4-1/2 Bolt Pattern - 95" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- Electric Brakes
- 3500 lbs
- 5 on 4-1/2 Inch
- 80 Inch Long
- 95 Inch Long
- Drop - 4 Inch
- etrailer
more information >
Continue Researching
- Q&A: 3,500LB Trailer Axle With 5 on 4-1/2" Bolt Pattern & 4" Drop With Electric Brakes 81" Spring Center
- Shop: Trailer Axle w/ Electric Brakes - 4" Drop - 5 on 4-1/2 Bolt Pattern - 95" Long - 3,500 lbs
- Shop: Trailer Axle w/ Electric Brakes - Easy Grease - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Shop: Trailer Axle with Idler Hubs - 4" Drop - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Q&A: How to Find Replacement Axle for 1998 Trail Star Boat Trailer
- Search Results: brake control
- Video: Review of etrailer by AxleTek Trailer Axles - 3,500 lbs Trailer Axle with Idler Hubs - e72GR
- Search Results: axle
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Shop: 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 26" Long
- Q&A: How to Determine Weight Capacity of Trailer Axle
- Article: Trailer Tire Sizing
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Trailer Wiring
- Search Results: leaf spring
- Shop: Suspension Enhancement
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Article: Most Popular Wheel Bearings
- Q&A: What is the Difference Between Load Range C and D ST175/80D13 Trailer Tires
- Search Results: trailer leaf springs
- Q&A: How to Determine Hanger Spacing for Tandem Axle Trailer Suspension with 26 Inch Springs
- Search Results: leaf springs
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
- Shop: Brake Controller
- Article: How to Accurately Measure Trailer Leaf Springs
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Search Results: trailer jack
- Q&A: Installing Leaf Springs on Single Axle Trailer