Installing The etrailer Electric Trailer Jack On A Trailer Tongue With Excessive Powder Coating
Question:
I purchased this jack for my T@B 400 I am having trouble installing, trouble is it will not go thru bottom hole.It seems to me that the paint / power coat is just a bit thick .I tried sanding down a bit but still no go .If I try to screw it thru it is back breaking. It is so close.what should I do.I am thinking to use paint remover to remove all coating below the mounting plate and then repaint after install.This should have taken 15 minutes to install.So far I am very disappointed with this product.please help me. Thanks.
asked by: Ed F
Expert Reply:
The outer tube of the Electric Jack w/ Footplate and 7-Way Plug # EJ-3527-BBX is 2-1/4" in diameter, which is a standard diameter for most tongue-mounted trailer jacks. If the paint on the trailer tongue is preventing the tube from sliding through the hole then you'll unfortunately need to sand through it or use a grinder to cut through the excess until you can get the jack to pass through. Once you get the jack installed I recommend touching up the paint to help prevent any rust or corrosion from forming between the tongue and jack.
![Kevin C](https://images.etrailer.com/static/images/catg/people/2455_tn.jpg)
Product Page this Question was Asked From
Electric Jack w/ Footplate and 7-Way Plug - A-Frame - 25-1/8" Lift - 3.5K - Black
- Camper Jacks
- Pop Up Camper
- Teardrop Camper
- Travel Trailer
- A-Frame Jack
- Leveling Jacks
- Tongue Jack
- Steel
- 3001 - 4000 lbs
- Electric Jack
- 25-1/8 Inch Lift
- Bolt-On
- 1 Jack
- etrailer
more information >
Continue Researching
- Shop: Rhino-Rack Masterkey Lock Barrels - Keyed Alike - Qty 2
- Shop: Rhino-Rack Masterkey Lock Barrels - Keyed Alike - Qty 2
- Q&A: How to Determine the Correct Sized Taylor Made Support Bow for Boat Covers
- Video: Review of Taylor Made Boat Accessories - Fiberglass Bow - 369924
- Shop: Taylor Made Support Bow for Boat Covers - Fiberglass - 6' Long
- Shop: Replacement Manual Override Cap for etrailer A-Frame Electric Jack - Black
- Q&A: Does Length of Ball Mount Affect Tongue Weight on Hitch Ball
- Shop: Lippert Power Stance Electric Trailer Jack w/ 7-Way Plug - A-Frame - 18" Lift - 3,500 lbs
- Video: Lippert Power Stance Electric Trailer Jack Review and Installation
- Search Results: lippert power jack
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Search Results: trailer jack
- Shop: Trailer Hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Wiring
- Article: Trailer Wiring Diagrams
- Shop: Stabilizer Jacks - 6-1/4" Drop Leg Travel - 18" - 650 lbs - Qty 2
- Search Results: jack
- Search Results: electric jack
- Q&A: What is the Difference Between Load Range C and D ST175/80D13 Trailer Tires
- Article: 5 Things to Know About Weight Distribution Hitches
- Shop: Brake Controller
- Video: Trailer Valet JXS Trailer Jack Review
- Search Results: electric trailer jacks
- Shop: Suspension Enhancement
- Shop: Ultimate Trailer Jack - A-Frame - Topwind - 27-1/2" Lift - 2,000 lbs
- Q&A: Can a 5.30-12 Size Tire be Replaced with a ST145/R12 Size Tire
- Article: Trailer Tire Sizing
- Search Results: 25580