Which Hellwig Rear Sway Bar for 2023 Chevy Silverado 2500 Z71 with Factory 2 inch Lift

Question

Question:

My 2023 silverado 2500hd duramax is the Z71 model with a factory 2inch lift. Will this sway bar fit?

asked by: Michael

0

Expert Reply:

Since your 2023 Chevy Silverado 2500HD is the Z71 with the 2 inch lift the correct the Hellwig sway bar would be the part # HE86XR actually.

expert reply by: Jameson C

0

Answer 1

No, the Hellwig Adjustable Big Wig Rear Anti-Sway Bar - 1-5/16" Diameter #HE96XR is designed for a stock ride height so you'll need part #HE86XR instead to accommodate the 4" lift on your 2023 Chevy Silverado 2500.

view full answer...

Answer 2

Yes, we do have a set of air bags that will fit your 2023 Chevy Silverado 2500 that is compatible with the factory puck system or an in bed hitch. These air springs fit both the 2WD and 4WD models and also fit the duallys. I recommend the Firestone…

view full answer...

Answer 3

For air bags that fit your 2023 Chevy Silverado 1500 Trail Boss I recommend the Air Lift LoadLifter 5000 #AL57388. These feature internal jounce springs for progressive support as well as stainless steel components to make sure they last. They have…

view full answer...

Answer 4

I contacted Roadmaster to verify that the Rear Anti-Sway Bar, #RM73FR is a confirmed fit for the 2019 Ram 3500 be it DRW or SWR. They confirmed this part is the correct for either type.

view full answer...

Answer 5

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…

view full answer...

Answer 6

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the…

view full answer...

Answer 7

A drop axle certainly can make it tough to reach the star wheel adjuster on a drum brake. The adjuster spoon tool we offer #W80630 has a 90-degree bend that will often let you get access to the adjuster even on a drop axle. Essentially you will need…

view full answer...

Answer 8

The spacing will depend on the axle diameter and on which particular spring hanger kit you use. If you have a 6000 lb 3 inch diameter axle, and you're using the #APT5 hanger kit which includes 7-3/4 inch equalizers and 2-5/8 inch shackle straps…

view full answer...

Answer 9

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 10

The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

That spindle looks pretty well destroyed so best option is going to be to replace the axle. You are going to need to measure your current axles in a few places to get the correct one as we don't have access to what your numbers reference. You…

view full answer...

Which Hellwig Rear Sway Bar for 2023 Chevy Silverado 2500 Z71 with Factory 2 inch Lift

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching