Does the Curt PowerRide 5th Wheel Hitch Fit the Puck System of a 2024 GMC Sierra 2500?

Question

Question:

Does the Curt Curt PowerRide C36WR fit in the puck system of the 2024 GMC Sierra 2500?

asked by: Tim

0

Expert Reply:

Yes, it does! The Curt PowerRide 5th Wheel Trailer Hitch item # C36WR will fit the 2024 GMC Sierra 2500. It comes with legs built into the base of the hitch that drops right down into the in-bed pucks. This hitch has a 30,000 lbs capacity.

expert reply by: Jerred H

0

Answer 1

You will want the hitch to be set at the height that 1) allows the trailer to be level, and 2) allows you a minimum of 6 inches between the bottom of the trailer loft and the top of the bed rails. The fifth wheel hitches offer several inches of up…

view full answer...

Answer 2

To measure the height that the fifth wheel head will need to be, on your custom made bed, you will need to park the vehicle and trailer on a fairly level surface and do some measuring. Back your vehicle under the fifth-wheel trailer stopping when the…

view full answer...

Answer 3

For me the Curt PowerRide 5th Wheel Trailer Hitch #C36WR does appear to be the best value. The built in lube plates help to ensure that you protect the hitch from getting marred up when connecting to the 5th wheel. And unlike some other manufactures…

view full answer...

Answer 4

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 5

I recommend going with the 30K Curt PowerRide #C36WR for the puck system on your 2024 Chevy Silverado 2500 short bed because of the high weight capacity and the smooth towing experience it offers. Normally for short bed trucks we recommend a sliding…

view full answer...

Answer 6

You are correct that some newer pickups have taller bed sides that make it a little more complicated to ensure that your trailer remains level while you have enough clearance between the bed rails and your 5th wheel trailer. While I can't tell…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 10

The B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package #BWRVK3775 you're looking at will work fine with your new Chevrolet Silverado. This hitch has 3 height adjustments so you'll be able to set the hitch height…

view full answer...

Answer 11

Beds shorter than 8 foot do commonly need a slider hitch David, but a lot of modern fifth wheel trailers are now made with tapered noses to help and in a lot of cases a slider isn't required. So if the trailer you plan to tow has a tapered nose…

view full answer...

Answer 12

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Does the Curt PowerRide 5th Wheel Hitch Fit the Puck System of a 2024 GMC Sierra 2500?

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching