Can The Bauer Products Manger Door Lock BA95FR Be Used For A Horse Trailer Down Window Latch?

Question

Question:

Im looking for a horse trailer down window latch. Does this latch serve that purpose?

asked by: Chris C

0

Expert Reply:

Yes, The Bauer Products Manger Door Lock # BA95FR can absolutely be used for a horse trailer down window latch, provided you have a 2-3/4" wide x 3-3/4" tall cutout.

expert reply by: Jesse M

0

Answer 1

The closest thing we have that will fit those dimensions is the Bauer Products #BA64FR. This fits a cutout that is 5-1/4" wide x 4-1/2" tall. Unfortunately, we don't have a narrower latch that will fit in your 4-3/4" tall opening.…

view full answer...

Answer 2

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 3

For the LCI52-SB-86.5-68.5, the two ending measurements are: 1st - measurement from hub to hub, meaning the length of the axle in this case is 86.5 inches. 2nd - spring seat dimension where they're welded, meaning the spring seats are 68.5 inches…

view full answer...

Answer 4

By "mobile home type bolt pattern" I believe you are talking about a 5 spoke utility bolt pattern such as what is on the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles #8-174-5UC3. To measure your axle from hub face to…

view full answer...

Answer 5

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 6

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 7

I do have an option but Glo-Brite is no longer in business so you won't be able to get any replacement parts for these lights such as lenses. The only option you have would be a full replacement for which the most similar option we offer is the…

view full answer...

Answer 8

We do have an option for an inverter to replace your 300 watt WIN-12/300TL, but the Progressive Dynamics part you mentioned is a converter, so for the same functionality you will want to replace it with a similar 400 watt inverter, the Go Power Pure…

view full answer...

Answer 9

The Champion 9,000-Watt Dual Fuel Inverter Generators w/ Parallel Kit, #CH49FR has the same power output specs regardless of type fuel used. There is a starting (surge) power output of 4,500 watts/37.50 amps with a running power output of 3,500…

view full answer...